Pressure screen

1. Sieve drum: Sieve drum with fine screen sieve width H0.15mm, slotted on 8mm thick steel plate using water jet cutting technology to form excellent round holes and burr-free notches, not like mechanical washing and grinding notches Generate stress and cracks at the groove end. And can provide a hard degree network process to improve anti-wear performance.
2. Rotor rotor: 3-4 rotors are installed on the semi-finished rotor, and the balance is strictly adjusted after assembly, so that the rotor does not generate vibration during high-speed rotation. The rotor is installed on the main shaft, and the rotor is installed on the rotor through a screw rod. The clearance between the rotor and the screen drum can be adjusted. The coarse sieve rotor uses a drum-type external rotor structure and corrects the dynamic balance. This structure can prevent impurities from tangling the rotor and affecting the normal operation of the equipment.
3. Shell: It consists of an upper cover and a cylinder. The lower part of the cylinder is provided with a tangential slurry inlet pipe. The middle part of the cylinder is provided with a slurry outlet pipe, and the upper cover is provided with a slag discharge port and a flushing water port.
4. Transmission device: including motor, pulley, v-belt, belt tensioning device, main shaft and bearing