Delivery Detail: Within 5 months
Cutting Set
One set cutting machine consists of one horizontal cutter, one vertical cutter, one cutting cart, and specific rail for cutting cart. (tongue and groove making device, hand-holding hole making device and vacuum sucking cover are optional).
Cutting wires on horizontal cutter are fixed on guide pillars while on vertical cutter each wire is tensioned by compressed air cylinder.
After the tilting hoister puts the green cake on the first cutting cart then it carries the green cake through horizontal cutter. When the cake arrives vertical cutting section, it will be jacked up to reduce vibration and cut on vertical cutting machine. Through the driving motion of chain, the gear box makes the cutting frames move up and down meanwhile the two cutting frames swing with equal force from both sides.
The air cylinder tension device drives the cutting wire to do reciprocating motion, and thus form transverse cutting action.
TEEYER sells products all over the county and exports to foreign countries such as Germany, American, England, Korea, Japan, Singapore, Russia, Indonesia and United Arab Emirates and so on.
TEEYER AAC Block Plant Advantages:
TEEYER AAC Block Plant Reference:
Working Live-Action:
Quality Control:
Cutting Specification:
Certifications:
Group Photos with Customers:
Introduction of AAC Block & Panel Plant:
AAC(Autoclave Aerated Concrete) is a new type building material that the raw materials are siliceous materials(fly-ash, sand, slag), calcareous materials(lime, cement and gypsum), and Aluminium powder. AAC product has been widely used in industrial and civil construction.
Advantages & Features of AAC Block & Panel Plant:
Production Engineering of AAC Block & Panel Plant:
1) The preparing of the raw material;
2) Batching, Mixing, and Pouring;
3) Cutting and grouping;
4) Autoclaving and finished products;
5) Side plate back, mould assembling and mould oiling.
Raw Material:
Flyash AAC Brick Series
Sand AAC Brick Series