yellow mineral wool insulation chilled water thermal pipe

Introduction of chilled water thermal pipe :

1.Material:

   1) steel pipe

   2) polyurethane insulation

   3) high-density polyethylene

2.Usage:

   1) urban centralized heat supply  

   2) warm room

   3) coal mine

   4) petroleum

   5) chemical and other anti-corrosion insulation field

3.Medium teperature: 50-140°c

4.Working pressure: 2.5Mpa

5.Laying method:

  1) direct bury

  2) built on stilts

  3) trench

6.Produce technical:

  1)Advanced Corona treatment

  2)Impeller blasting

  3)Leakage alarm line

7.Advantage:

  1)good insulation properties ,low heat loss (the 25% of traditional pipes),

  2)energy saving

  3)waterproof and corrosion resisdence

  4)no trench,be directly buried in ground or water

Material Information:

1.Outer sleeve pipe: HDPE outer sleeve pipe

   The material form Shanghai JinFei Petroleum Chemical Industry Co.,Ltd and

Sinopec Sabic Tianjin Petrochemical Company Limited

2.Insulation layer: Polyurethane  foam 

   Advantage: with high density,strong adhensive and eco-environmental characters 

which fills between steel tube and the jacket

  Raw material is from: fluoride-free foam products supplied by Bayer Jinling Polyurethane Co.,Ltd.

Density:≥60kg/m3

3. Steel pipe: seamless steel pipe(Dia<159),  spiral steel pipe(Dia>219)

   The material from Anshan Iron and Steel Group Corporation

Process of  mineral wool  chilled water thermal pipe

Picture of insulation pipe

Package: Bulk and loading by container, or according to the request

Delivery time:  30days after receiving your prepayment 

Transport term: By ship, by train

Loading port: Tianjin Port

The product we can produce

1: Are you a manufacturer or a trading company?

We are a manufacturer which has  more than   2 0 years' history.

2: Where is your manufacturer? How to visit it?

Our factory located in  Yutian Economic Development Zone ,TangShan , China. A bout 1.5 hours drive time to  Beijing and TianJin airport . Mainly producing pre-insulated pipes, HDPE outer protection pipe and 3PE anti-corrosive pipe.

You can take a plane to Beijing or Tianjin .then we could pick up you at the airport .

3: How do we control our products' quality?

We have professional quality control workers and quality inspection center(CNAS lab)  to control the entire production quality.     

4: How do you transport these products?

We use straps to hoist pre-insulated pipes, it can avoid no damage to our products, no hooks for lifting pipe directly. During the handling process, collision, tossing and more ground drag scrolling are strictly forbidden.

In the process of long distance transport, the pipes should be fixed, and not damage outer protecting pipes and insulating layers.

5: Can I customize some other sizes of products?

Yes! We can according to the customer's request.
If you have any other questions, please don't hesitate, contact us.

Let us begin to communicate immediately  >>> 

1