Monoblock (diverters) P40 distributors are used in hydraulic drives with gear pumps on agricultural and road machines for various
technological purposes, as well as on excavators and a number of other machines in which axial piston pumps are installed.
Specifications 1p40:
• Number of working sections 1 piece
• Nominal flow rate 40 l / min
• Maximum pressure 35 MPa
• Operating temperature range -40 ° C + 60 ° C
• Viscosity of the working fluid 10-460 cSt
• Filtration degree 25 nm
• Working fluid temperature -15 ° C + 80 ° C
• Internal leakage at P = 16 bar <6 cm3 / min
• Force on movement of the spool <25 N
• Weight of the hydraulic valve 1.5 kg
Connection: side
Manufacturer Code: BP40-A1-GKZ1
Used: hydraulic manipulator ОМТ70-01, 02, 03, 04 (VelMash), hydraulic manipulator ОМТ97 (VelMash) *, hydraulic manipulator
LV-185-10, 14 (Maikop) *, multi-lift MPR-1, MPR-2, bunker truck MSK-1, MSK-3, MSK-3101, MSK-4301 (Ryazhsk), FAUN and other mobile
equipment.
Thread for p40 monoblock valves
1/2 feed and return to 3/8 cylinders
Distributors (diverters) structurally have from one to six sections. By throughput they are divided into two groups: 40 and 80
liters per minute. Manual, electric and remote control is possible. The most common options are manual controls. Each section has
an inlet (marked P) and an outlet (marked T), as well as ports for connecting working tools. In distributors with more than one
section, the discharge and discharge ports are common. At the inlet, there is a control valve that automatically opens the drain
line when a peak pressure is reached, usually 200 bar.
Monoblock distributors can be connected in one circuit, for example, if you eventually need another working section, you do not
have to buy a more expensive option, but only connect one unit. The one-piece body allows you to get compact dimensions and not
worry about leaks between sections.
Depending on the type of work, it is possible to install on any of the sections of the hydraulic valve - the floating fixing mode
and the floating mode!
The floating position allows this model to be used on agricultural and municipal vehicles, where it is necessary to ensure the
appropriate operating mode. For example, a harrow. Latching function means that all positions of the lever, including floating
ones, are locked. The lever is set by the operator in a certain position and will remain in it until a mechanical switch to
another position occurs.