Type | Plate, Sheet,Strip, Coil | ||||
Length | 0~12m or as per the client's requirements | ||||
Width | 0~2500mm or as per the client's requirements | ||||
Thickness | 0.3~1200mm or as per the client's requirements | ||||
Process | Hot/Cold Rolled | ||||
Surface | No.1 No.2D No.2B BA No.3 No.4 No.6 No.7 | ||||
Packing | Steel Frame, waterproof paper, wooden pallet, wooden case or as per the client's requirements | ||||
Material Grade | Carbon Steel | ASTM A36 | |||
ASTM A515 | GR.60/65/70 | ||||
ASTM A516 | GR.55/60/65/70 | ||||
Alloy Steel | ASTM A387 | Grade 11/12/22 | |||
Stainless Steel | ASTM A240 | 304/316L/316Ti/317L/310S/410 | |||
S31803/S32750/S32760/904L/S31524/S31050 | |||||
UNS N08367/N08926/N08800/N08810 | |||||
Nickel Alloy | ASTM B409 | UNS N08800(Incoloy 800)/UNS N08810(Incoloy 800H)/UNS N08811(Incoloy 800HT) | |||
ASTM B463 | UNS N08020/Alloy 20) | ||||
ASTM B575 | UNS N10276(Hastelloy C276)/N06022(Hastelloy C22)/N06200(Hastelloy C2000) | ||||
ASTM B127 | UNS N04400/Monel 400 | ||||
ASTM B162 | UNS N02200(Nickel 200)/N02201(Nickel 201) | ||||
ASTM B688 | UNS N08367 | ||||
ASTM B424 | UNS N08825(Aloy 825) | ||||
ASTM B443 | UNS N06625(Inconel 625) | ||||
ASTM B168 | UNS N06600(Inconel 600) | ||||
Titanium | ASTM B265 | Ti 1/2/5/7 |
A516 Grade 55 Steel Grade
Steel Category: Boiler & pressure vessel steel plate
Adopt standard: A516 ASTM
A516 Grade 55 steel grade is used in moderate and lower temperature pressure vessels steel because of the steel material chemical composition and the property in welding.
For the reason of excellent notch toughness and weldability of A516 Grade 55, it sells good to large fabricators service in gas & oil plants.
About A516 Grade 55 detail information,please check technical date in following.
The A516 Grade 55 Chemical is max composition of product analysis:
Grade |
C % |
Si % |
Mn % |
P % |
S % |
A516 Gr 55 |
0.18-0.26 |
0.13-0.45 |
0.55-1.3 |
0.035 |
0.035 |
The mechanical properties at A 516 Grade 55 steel plate
Grade |
Thickness(mm) |
Min Yield (Mpa) |
Tensile(MPa) |
Elongation(%) |
A516 Gr.55 |
6mm-40mm |
205Mpa |
380-515Mpa |
27% |
40mm-100mm |
205Mpa |
380-515Mpa |
23% |
|
The min impact energy is longitudinal energy |