water porous dripping soaker hose producing machine
water porous dripping soaker hose producing line
porous hose producing line
We are holding the core of the technology. we have 10 years of experience for studing and designing and making this line.
we are making development always to increase the machine's technology steps.
we are having the special technology in designing this machine.
we are having the important materail formula technology.
we are having this rubber recycle reuse technology prize from china government.
I.Materail coming from
Car , truck tire after waste , recycle line will separate the wire, the nylon fiber , and the rubber . the rubber will crush into powder. This powder is the mainly raw material to make rubber soaking hose.
II. Introduction of Soaker hose(leaky hose, porous hose ) introduction
l Leaky pipe is made of recycled rubber mainly from car tyres. Leaky Pipe is so free of toxins that it is widely used in the irrigation area, fish industry for oxygenating water and also use in water purity industry .
l Leaky Pipe is a specific trade marketed product and not a term for all porous hoses. Make sure it is the best porous hose, the one trusted by landscapers architects and commercial growers.
l Leaky pipe does not have any actual drippers or holes in it. When the Leaky Pipe is manufactured during the extrusion process a carefully controlled amount of air gaps are left in the wall leaving a porous wall. The water comes out through the porous wall in an even output of 2 litres per metre per hour. As there are no holes in the wall this makes it ideal for burying in the soil as it can not be blocked from soil particles or root
l This hose use waste tire recycled powder , this project belong to green industry area, it use the waste things change into useful hose. This project supported by all countries government . some of our customers applied final support from government .
General introduction of this hose made by our machine:
Usage of the hose :
GENERAL INTRODUCTION OF THE HOSE
This pipe can release fresh and enough oxygen from its wall evenly .
USAGE INTRODUCTION
1. garden and farmer filed irrigation use
soaking hose is a new products in the irrigation industrial, its main characters is : on the wall of the hose, there are many micro bending hole without seen by eyes, the hose is softly and flexible .the hose use life can be 10-15 years, the water can be seapaged from the hose wall under the condition of 0.1~0.2MPa. the material of this hose mainly use waste tire rubber and some other special chemical additives. Machine easy to operate, cost low, high productive.
l we studied and developed this hose making machine's technology ourselves, we provide turn key project, we provide material ingredient , we help you install the machine and give your workers training .
l This soaker hose length could be adjustable by customer
lTwo ends with rubber or brass connectors ,it can be used more than one piece
l It is used in the Garden and Agriculture, perfect for gardens, around trees ,narrow walkways
lIt can be put under underground to water the garden , vegetable and save water and labor
l .The porous materials allows uniform sweating and widespread with saving water, Uses up to 70% less water
l No limitation of water pressure
l this hose material use waste tire crusher powder and plastic and some additives, after micro foaming , the hose wall appear un-seen micro hole. when the water pass through the hose, the water seepage from the hole under the gravity .
l no-damage soil structure, water come from hose wall very slow, soil absorb water itself from the micro hole, keep soil soft and wet.
l keep irrigation environmental less humidity, avoid insect and plant disease.
l Leaky Pipe is ideal for a multitude of drip watering areas around the garden such as all your beds and borders, vegetable area and short lengths of hedge.
lLeaky pipe is made of recycled rubber mainly from car tyres and is manufactured in Iceland where the natural heat also plays a large part in it manufacture making it a very environmental friendly product. Leaky Pipe is so free of toxins that it is widely used in the fish industry for oxygenating water.
l Leaky pipe does not have any actual drippers or holes in it. When the Leaky Pipe is manufactured during the extrusion process a carefully controlled amount of air gaps are left in the wall leaving a porous wall. The water comes out through the porous wall in an even output of 2 litres per metre per hour. As there are no holes in the wall this makes it ideal for burying in the soil as it can not be blocked from soil particles or root intrusion.
2. aquaculture aeration water purity
l High dissolved oxygen:advanced micro pore aeration bubbles in great contact surface of the water bodies and water flow rate is low,floating,long contact time,and thus high oxygen mass transfer effeciency.
l Activation of water:the microporous aeration devices,like the water body into a number of slowly flowing river,sufficient dissolved oxygen in the water body can establish a natural ecosystem,the water alive.
l Restore the water self-purification:microporous aeration is underwater oxygen and other oxygen is surface oxygen,qauaculture water bottom anoxia,the body of water underlying the deposition of fat mud,organic excrement,and the remaining metamorphic bait and other intractable organic matter,consume large amouts of oxygen,and sufficient microporous aeration ,and make it into microorganisms to dissolved organics,and water self-purification function to restore and strengthen.
l Ultra-low power:as a result of the microporous aeration device,the oxygen mass transfer efficiency is very high,so that the unit of dissolved oxygen in water to quickly reach more than 4.5mg/l,less water tankers or impeller oxygen quarter energy consumption can be significant savings in electricity costs of the farmers.
l Ecological farming and protection of breeding efficiency:continuous replenishment off the porous oxygen provide sufficient dissolved oxygen in the water,the water self-purrification ability to recover increased,microflora,algae natural balance,build up the naturak ecology of the water body,the viability of the breeding population is steadily improving,the full protection of the breeding efficiency.
l Security,environmental protection:microporous aeration device installed on the shore,good safety performance will not feed the body to bring any pollution,other oxygen water,easy to leakage on the human body and fish potential hazards.
l Easy maintenance:this product is lightweight,durable,easy to maintain.
l The hoses can be wrapped in steel plate, and the corresponding plastic tube with a tee, suitable for all kinds of fish, to the layout of the real benefit farmers.
for sewage treatment :
Bio-surfactant air aeration system
introduction :
this system use to recovery the dirty water quality .
media : bacteria against pollution water aeration system
principle :
make pools according to the river or pool’s size. This pool we call it bacteria pools, it is higher than downstream water 0.5meteres . bacteria will put in this pools . when the bacteria living in the pools, they will consume nitrogen , phosphorus, potassium and other pollution element in the water . in order to feed these bacteria grow up fast, air aeration system will use to supply enough oxygen . bacteria living need eat fish and aquatic animal’s excrement . so , if the bacteria can grow up fast , the
anaerobic environment can change to oxygen-enriched environment, the water can be get clean and recovery to be high quality water.
Use in factory and river sewage treatment . easy to install , low cost, high anti acid , corrosion and alkali as well as evenly bubble .
Air compressor :2-3kw
Working pressure :0.25-0.6KG
Bubble diameter:3-15um
Desolved oxygen :6.5-8.5g/L
Air flowing:90-100 cubic meter
Pipe length: 150-200m
Rubber aeration tube Spec | |
Outer diameter(mm) | 18 |
Inner diameter(mm) | 3 |
Wall thickness(mm) | 12 |
Metres heavy(g/m) | 135 |
Packing quantity(meters/roll) | 200 |
Cold resistance(-40°C,8h) | Tensile length ≥2.2 Mpa |
Tensile elongation ≥130 percent | |
Hot empty aging (70°C 72h) | Tensile strength rate ≤20 percent |
Break elongation rate ≤20 percent | |
Resist 5% NaOH (23°C 72h) | Tensile strength rate ≤20 percent |
Break elongation rate ≤20 percent | |
Resist 5% HCl (23°C 72h) | Tensile strength rate ≤20 percent |
Break elongation rate ≤20 percent | |
Pressure | s-1 200Kpa (water seepage amount) 600-800ml/h.m |
s-2 200Kpa (water seepage amount) 10.8l/h.m | |
200Kpa (increase Oxygen amount) 420ml/h.m | |
Outer Diameter | 10 to 28 mm |
Wall thickness: | 2 mm above |
The bubble diameter | 20-50 um |
Dynamic power | 02 / kw. Hr |
The air flow | 1.5-5 cubic meters/m.Hr |
Applicable water depth | 0-5 meters |
Characteristics of water pool aeration hose :
1. Saving the energy consumption by 75% effectively
2. Increasing the growth rate of fish and shrimp
3. Maintaining enough oxygen in water
4. Reducing harmful gases in water
Some parameter of the hose :
1.
materail come from waste tire