vane pack mist eliminator apply in industry
Product Description |
Demister vanes are the most basic and important components of the demister. The performance of the demister is crucial to the operation of the entire defogging system. Demister vanes are usually made of polymer materials (polypropylene, FRP, etc.) and corrosion-resistant stainless steel, two major categories of materials. There are many types of vanes. By geometry can be divided into polygonal and streamlined.
Specifications of vane pack mist eliminator
Items | Specific Introduction | Unit | ||
Materials of drift eliminator | FRPP | Stainless steel | Fiberglass |
|
Tem resistance | 70-80℃ | 200℃ | 130℃ | ℃ |
Baffle plate thickness | 3mm | Set by customer requirements | Around 2.3mm | mm |
Price | Lower | Higher | Higher | RMB |
Form | Horizontal type (plate type), Herringbone type (weir type), V type, combined type, etc. |
| ||
Area of drift eliminator | The inner diameter of the desulfurization tower area or cross-section area of flue | M2 | ||
Flow velocity of air tower | Plate type 3-4 m/s, weir type 2.5-5.5 m/s | m/s | ||
Degree | Two degrees | degree | ||
Interval and height between baffle plates | Designed by different desulphurization craft |
| ||
Flushing layers of flushing systems | Upper and bottom of first-degree drift eliminator, bottom of second-degree drift eliminator, configurable and topper layer of some drift eliminator be flushed in hand | layer |
Contact:
Lily
QQ:2998682431 Tel:15369881752
Whatsapp:008615369881752