Anping Hualai Metal Wire Mesh Co., Ltd. is a 10 years factory producing vane mist eliminators, knitted wire mesh and wire mesh demisters. For now, we can produce three kinds of vane mist eliminators as shown below.
No. | vane shape | Material | Hook (yes/no) | Vane Height | Total Height with frame |
1 | Streamline line type | PP | yes | 170mm | 200mm |
2 | PP | yes | 235mm | 250mm | |
3 | poly-line type | PP | no | 170mm | 200mm |
4 | PP | no | 235mm | 250mm | |
5 | 316L | no | 170mm | 200mm | |
6 | 316L | no | 235mm | 250mm |
Vane Type Mist Eliminator
The vane types are the Chevron type of mist eliminators which consist of a set of specially designed vanes with a well defined geometry, with closely spaced corrugated plates. They are very usual and useful internals for liquid separation from gas. These types according to design and shape can remove the droplets more than 8 microns.
Hualai has produced a range of mist eliminators for critical applications in the oil and gas sector, Standard Material of vane type mist eliminator is polypropylene & stainless steel.
When to use vane type mist eliminator instead of mesh pad?
Larger droplets;
High Gas Velocity;
Low Pressure Drop;
High Liquid Load;
Extremely Viscous Liquid;
Accumulated Residues;
Clogging Particulates;
Severe Corrosion;
Surge Buffeting;
Foam Problems
Removal of very small droplets can be achieved using a two stage mist eliminator by fitting a mesh pad to the upstream face of the unit to coalesce droplets as small as 4 to 5 microns into droplets in the size range which are easily removed by the vane separator.
Contact now for more details!
1. Click contact supplier button.
2. Send an email as in the picture.
3. Cell / wechat / skype / whatsapp: 0086 13333087316