underground conduits PLB HDPE Ducts for laying Optical Fiber Cable

underground conduits PLB HDPE Ducts for laying Optical Fiber Cable

HDPE PLB Duct are designed and engineered to house the sensitive nerves of Information technology i.e. optical fibers thus enabling information transfer across the globe. Available as per International Standards or Customers requirements,Most Suited for Pulling Optical Fibre Cable (OFC), Telecom, Electrical Lines etc.

Material: Permanently lubricated HPDE Telecom Ducts are manufactured with the superior grade of High-Density Polyethylene materials. HDPE pipes manufactured meets all the requirements of TEC Specifications as well as IS 4984-1995.

Lubrication: Permanently lubricated HDPE Telecom Ducts have special lubricated compound on Inner Side for Conveying Optical Fiber cables with extremely low friction. Coefficient of Friction between the inside of the HDPE Duct and the outside of the inserted communication cable does not exceed 0.06. Properties of Lubricant are Its strongly locked into HDPE. It has same physical/mechanical properties as HDPE except low Coefficient of Friction value which is less than 0.06. Its evenly distributed around the bore and along the length of duct. Does not react with water, hence it is possible to clean the duct by water stream in case of any obstruction/accident. Have same frictional properties during life of the duct.

Product appearance:

High density polyethylene (HDPE) Silicon Array Pipe`s inner and outer walls should be clean and smooth, not allowed to have bubbles, obvious scratches, dents, impurities, color inequity defects. Pipe ends shall be cut flat and perpendicular to the tube axis. The inner wall of silicon core should be tightly welded and no deform phenomenon. The outer wall of the silicon array pipe is clearly marked.

Applications:

HDPE Ducts are suitable for installation in the field dirt trenches, under sidewalks, roads, within communication networks, between communication centers and between cities. They can also be used in branch networks between cells, distribution cabinets, poles, in walls and within subterranean networks of homes, allowing the insertion of optical or copper communication cables, as well as TV/cable aluminium co-axial cables. Cables can be inserted in through the pipe by blowing, with an internal air-pressure up to eight bars.

Additional Information:

• Port of Dispatch: Tianjin China
• Delivery Time: Available Ex-Stock
• Packaging Details: 500 Meters, 1000 Meters, 2000Meters

• Environment Stress Crack Resistance (ESCR)
• Impact Resistance
• Crush Resistance
• Low Coefficient of Friction
• Temperature Resistance
• Ultraviolet (UV) protection

A: We are professional manufacturer and welcome to your visit at any time.

Q2. How long is your delivery time?
A: Generally it takes 5-10 days if the goods are in stock,which is depends on your quantity and can be negotiable.

Q3. Do you provide samples ?
A: Yes,of course sample is avaliable and for small quantity we can supply for free.

Q4.What is your terms of payment ?
A: L/C,Western Union,T/T30%  in advance ,balance before shippment and so on.

Q5. For pipe fittings, what do you do mainly?

A: For fittings, coupling (socket), elbows, tee, reducer, union, valve, cap some electrofusion fittings and compression fittings.

Q6.Can I have my own Logo on the product?
A: Yes, sure,you just send us your drawing,we'll make logo for you and before production we will confirm with you in advance.

Q7.Can I request to change the method of packaging and transportation?
A: Yes, the packaging and transportation can be made as per your requirements.