The V-1 Calibration Block is used for calibrating ultrasonic flaw
detection equipment in both laboratory and on-site conditions. It
includes a 100mm radius, 1.5mm and 50.0mm holes, engraved
reference mark scales, and slots at the zero point which provide
calibrating signals at intervals of 100mm range. In accordance with
British standard BS 2704 Block A2 Mod. 1, DIN 54-120, and ISO
2400.
Dimensions: 300mm*100mm*25mm
Engineering plastics storage cases
Net weight: 5.0kg
Gross weight: about 6.5kg
The V-2 Calibration Block is a small calibration block for on-site
checking of miniature shear wave probe index, time base, beam angle
and gain. It includes a 25mm and 50 mm radius, 5mm hole(or 1.5mm),
engraved reference mark scales from 35 to 75 degrees. In accordance
with British Standard BS 2704 block A4, DIN54122.
Dimensions: 75mm*43mm*12.5mm
Engineering plastics storage cases
Net weight: 0.5kg
Gross weight: about 0.75kg