uhf long range rfid card copier(writer) 1m middle range rfid reader with free rfid tag
Brief Introduction:
1.UHF RFID high performance desktop reader embedded with module which designed by using Impinj INDY chip, maximum power supply is 25dBm. 15dBm is recommended as fixed power
2.USB interface isavailable for power supply and communication, which reaches the most simply connection.
3.With internal 3dBi circular polarization antenna, tag reading distance is adjustable from 0 to 1 meter.
4.High read rate as 200 tag/s
5.Two GPIO connect to LED light and buzzer, clients can easily control IO according to the special requirement
6.Good writing performance, well suitable as desktop reader or identifying device for high performance industrial application.
Technical Data:
No | Item | Technical Data | Unit | Remark |
1 | Fixed current | 380 | mA | USB Power supply @15dBm |
2 | Standby current | ≤100 | mA | Connect by USB |
3 | Frequency range | 840~960 | MHz | |
4 | Default working frequency | Frequency hopping | MHz | Frequency interval 250KHz |
5 | Channel bandwidth | 250 | KHz | |
6 | Frequency hopping speed | ≤2 | S | |
7 | Fixed power | 15 | dBm | Recommended Value |
8 | Stepping interval | 0.5 | dB | 5~25dBm,adjustable by software |
9 | Label protocol | EPC C1G2/ISO18000-6C | ||
10 | Communication Protocol | Asynchronous serial ports | ||
11 | Starting time | ≤50 | MS | |
12 | Radio-frequency rising time | ≤500 | μs | |
13 | Radio-frequency dropping time | ≤500 | μs | |
14 | Adjacent channel power leaking ratio | ≤-40 | dB | ±1CH |
≤-60 | dB | ±2CH | ||
15 | Frequency stabilizing ratio | ±10 | ppm | -25℃~+40℃ |
±20 | ppm | -40℃~+60℃ | ||
16 | Max reading range | 1 | m | Internal 3dBi antenna |
17 | Reading tags’ rate | >200/s |
Appearance and Structure:
Dimension(Length X Width X Height):129×80×22mm;
Weight:180g;
Interface Definition:
Environment Requirement:
Certification:
FCC ID: RVZHYR830
CE: ETSI EN 301, ETSI EN 302, EN 50364, EN60950