tungsten nickel copper rod WNiCu rod tungsten heavy alloy
Description: tungsten heavy alloy
Tungsten-nickel-copper alloy is made of tungsten, nickel, copper and other chemical elements in appropriate proportion. Alloys are mainly with over 85% tungsten and low amounts of nickel, copper, etc. The ratio of added nickel and copper is normally 3:2.WNiCu alloys are produced in processes of liquid phase sintering and added elements alloying, etc. Due to various characteristics and uses of the alloy, the compositions can be divided into main series of W-Ni-Fe, W-Ni-Cu, W-Co, W-WC-Cu, W-Ag, etc. The WNiCu alloys from Achemetal Furnace co., Ltd comply with Standard ASTM B777-99.
Application: tungsten heavy alloy
1.WNiCu alloy is widely used in fields of aerospace, aviation, military and oil drilling;
2.It is also applied for electrical instrumentation, medical and industrial purpose; tungsten heavy alloy
3.WNiCu alloys can also used for producing balancing weights, high temperature moulds, electro-heat upsetting anvil block, the core of armour piercing shell and protection shields for high-energy rays. tungsten heavy alloy
Features: tungsten heavy alloy
1.Tungsten-nickel-copper alloy has a high density of 16.8g/cm3 to 18.75g/cm3;
2.It has high tensile strength from 700 to 1000 MPa; tungsten heavy alloy
3.It owns strongly absorbed radiation capacity, which is about 30% to 40% higher than that of lead;
4.WNiCu alloy has large coefficient of thermal conductivity, which is five times higher than mold steel;
5.The coefficient of thermal expansion is fairy small. The coefficient only accounts for 1/3 to 1/2 of iron or steel’s;
6.Tungsten-nickel-copper alloy possesses good conductive property, high strength as well as good weldability and workability;
7.WNiCu alloy is a kind of non-magnetic metal. tungsten heavy alloy
Parameters of WNiCu Alloys:
Class |
Nominal W |
Density |
Max. hardness |
Tensile strength |
Elongation |
weight% |
g/cc |
Rockwell ‘C’ |
MPa |
% |
|
Class1 |
90 |
16.85-17.25 |
32 |
700-1200(600-800) |
20-33(4-8) |
Class2 |
92.5 |
17.15-17.85 |
33 |
700-1400(500-600) |
15-25(3-5) |
Class3 |
95 |
17.75-18.35 |
34 |
700-1200 |
8-15 |
Class4 |
97 |
18.25-18.85 |
35 |
600-1000 |
8-14 |
Note: The data in brackets apply to non-magnetic WNiCu alloy. |
Achemetal Furnace Co., Ltd is a professional manufacturer and supplier of tungsten-nickel-copper alloys in China. Besides WNiCu alloys, we also provide WniFe alloys, tungsten heavy alloys, tungsten heavy alloy plates, tungsten heavy alloy rods as well as tungsten heavy alloy parts. All of our products are made in accordance with the standard of ISO9001 and ASTM B777-99. Above 60% of our WNiCu alloys are exported to more than ten countries and areas, such as USA, Germany, Japan, Russia, South Korea, etc. Our tungsten-nickel-copper alloys have been highly recognized by customers for their excellent quality and accuracy. tungsten heavy alloy
1,Tungsten&molybdenum profiles (rods,bars,tubes,plates,sheets of tungsten,molybdenum and their alloys).
2,Balance weight of tungsten heavy alloy (for motors,watches,golf clubes ,propellers).
3,Power automotive industry (tungsten copper switches,contactors,tungsten contactors)
4,Magnetron sputtering targets (flat panel displays,photovoltaic).
5,Vacuum coating industry (evaporation boat,cathode,evaporation coils,crucibles)
6,Quartz,glass and rare earth smelting industry (electrode,spinning nozzle,crucibles)
7,Parts for medical equipment (collimator device of CT machine,mammography target of X ray machine).
8,Electronics industry (ion implantation components,MOCVD machine parts,electron gun parts)
9,Nuclear aerospace and military industry (carrying boat,radiation shield,tungsten crucible for renewable nuclear fuel,rocket nozzle,throat,penetrator).
10,Vacuum or gas protected high temperature furnace material (sintering furnace,monocrystalline furnace,annealing furnace)
(1)Tungsten and molybdenum crucible(spinning,forging,sintering,welding),heating element.
(2) Heat shield,shelves,tray,hooks,seed holder,cylinder,pallet,screw,nut.
(3) Complete hot zone for sapphire crystal growth furnace (KY,ESG,CZ,HEM)
Achemetal Tungsten & Molybdenum Co., Ltd., located in Luoyang, Henan Province, China, is a manufacturer of tungsten and molybdenum specialty products. Our product line includes foil, sheet, plate, wire, rod, fabricated part as well as pressed and sintered part. Our products have been used in a wide range of industries, including electronics, lighting, semiconductor, automobile, fiberglass, aircraft, medical and many others. We are committed to serve customers, helping our customers and working with our customers to succeed in the ever challenging market.