If you need to send UPS/Fedex/TNT/DHL, please contact us. We need to discuss the freight with you.
The trianglelab has always been concerned about product quality.We are developing products and working hard to improve the quality.We will not abandon our reputation because of many cheap products on the market.It is believed that only high quality products can ensure the quality of your work and bring safety to your work.Some of our products may be more expensive than others,but please believe in our quality and believe that you will not regret when you receive the goods.
Name: Triangle Lab - ULTEM/PEI 1010 (Exclusive customization) SIZE: 1.75MM filament Announcement: The new model has been produced. Sales will start on May 4, 2021. The circular base of the new version of the filament is different from the one in the photo. But the filament is the same.
Ultemtrade 1010 3D Filament Ultemtrade 1010 PEI(Polyether Imide) is an amorphous,high-performance polymer that combines excellent thermal properties,exceptional dimensional stability,inherent flame retardancy,and good chemical resistance.Ultemtrade resin offers the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 217degC. Product attributes include: * High thermal properties:(Tg) of 217degC * Inherent flame resistance * Long-term hydrolytic stability * Excellent dimensional stability(low creep sensitivity and low,uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions * Exceptional strength and modulus,even at elevated temperatures * Good resistance to a broad range of chemicals,such as automotive fluids,fully halogenated hydrocarbons,alcohols,and aqueous solutions * Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies Notice:The PEI filament ishighly absorbable!!You need to store and feed in a sealed drying chamber,otherwise you filament will get wet infew hours.You need to dry them out at higher temps once the filament absorbs moisture(which will happen to everyone eventually).
The 30g sample version must tobe unwind before baking. 1.Rewind the filament on a wooden or metal spool. 2.Bake it in a oven @ 80℃ 4~5 hours. Automotive / Transportation Applications:Ultemtrade resins provide automotive manufacturers with a high performance,chemically resistant,thermally-stable,cost-effective alternative to metal that is strong enough to replace steel in some applications and light enough to replace aluminum in others.For applications like transmission components,throttle bodies,ignition components,sensors and thermostat housings. Electrical / Electronics Applications:Ultemtrade resin may be an excellent material choice for today's demanding electrical applications,including connectors,MCB components like housings,shafts and levers,hard disk drive internals,FOUP's,BiTS,PCB's,MCCB internals,Plenum devices,LCD projector internals,fuel cell components and many other applications. Filament Specifications: * Diameter: 1.75mm(+/- 0.05mm)
* Colors: Natural Recommended Print Conditions: * Extruder Temp: 370 - 390degC * Bed Temp: 120 - 200degC * Bed Prep: Ultemtrade or KAPTON Tape is the ideal build surface tape or high borosilicate glass+glue stick * Print Speed: Print speeds of 20-30mm/s(starting point),faster as results dictate * Enclosure Temp: Ultem prints best in a warm to hot build environment Annealing Printed Parts:If needed,parts printed using Ultemtrade PEI may be annealed in a hot-air oven to reduce any printed-in stresses that may be present in the part.Printed-in stresses may occur in any plastic and may result in lower than expected mechanical properties.If this is an issue with your part,then you can follow the simple 5-step ramp up/down process for annealing the Ultemtrade parts. Step 1: Place printed parts in cool,room-temp oven. Step 2: Set temp to 150degC and allow to stabilize for 1 hour. Step 3: After 1 hour at 150degC,increase oven temp to 400degF and allow to stabilize 1 additional hour. Step 4: After 1 hour at 200degC,reduce heat back to 150degC and allow to stabilize for 30 minutes. Step 5: After 30 minutes,turn off oven heat and allow printed parts to return to room temp inside the oven as it cools. Ultemtrade is a registered trademark of Sabic Innovative Plastics.
Related Products
Packing&Shipping
We usually have three different layers of packaging for ordinary products. If you have special needs for packaging, you can consult our online staff.
Company Introduction
Suqian Weishuo Technology Co. Established in 2014, located in Suqian City, Suqian New Material Science and Technology City, covering an area of 2,600 square meters. The company mainly develops and produces 3D printers. 2016 Dforce as our main brand. after 2016 the company is dedicated to research to improve the performance of 3D printers. By 2021, the company has developed and produced hundreds of 3D printer performance enhancing accessories as well as solutions. dforce is dedicated to the design of high-end 3D printing nozzle systems and the development of printing material processes, providing customers with integrated solutions for printer software and hardware.
Our Services & Strength
1: the company has more than 11 patented technologies by 2021.
2: The quality of our products is in the leading position in the industry.
3: The company is an integrated R&D, manufacturing and sales company, with extremely competitive products.
4: The company's sub-brand Triangle Lab has a high international reputation
Patent Achievements
Part of the utility model patent certificate display
About Logistics
If you need to send UPS/Fedex/TNT/DHL, please contact us. We need to discuss the freight with you.
FAQ
Q. Can I get the sample for reference?If you have a regular fan base or a certain number of videos played, you can provide us with proof of your account and you can request a free sample.Other merchants who need samples can follow the contact us to buy one product as a reference.Q How is the quality of your products?
Each of our products is carefully polished, and it is our ultimate goal to provide our customers with high quality and premium products
Q. May i get a cheaper price?
A cheaper price will be given if there is a large quantity you need.
Q. Are you a factory or trading company?
We are a 3D printer R&D company that has been in business for 8 years and is dedicated to the development of 3D printers and the upgrading of printer accessories. We can both develop products and sell our products.
Q. When can I get the quotation ?
We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority. Our price is based on quantity, and it’s a tiered structure,
meansing the more quantities, the greater the disicount.Please tell us your estimated quantity when need a quotation.
Q. May i know the production state of my order?
You can contact our online customer service to follow up the production of your order, the products in stock we will send out as fast as possible, if you need custom products, we may take a longer time, of course, if your products need to be expedited, we can also try to meet your needs
No desirable products?
Sourcing assistant>
How to start your business
Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier