thick customized 20mm width hardened and tempered steel strip bimetallic strip
1. BIMETALLIC SHEET CUPN ALLOY :
2. BIMETALLIC ALU SHEET : ALSN20CU
Mainly used in the manufacture of bearings Bridges, ships, vehicles, boiler, pressure vessel, oil pipelines, large steel structure, etc.
1.Experiment method
1.1. Chemical analysis method
The sample is first removed from the surface layer by about 0.1 mm, and then the wear layer is scraped, but the scraping depth is not to exceed 60% of the thickness of the aluminum alloy. The scraped alloy is taken for chemical analysis, wherein the steel, iron and
manganese elements are in accordance with GB6987-86. The Chemical Analysis Methods for Aluminum and Aluminum Alloys stipulate that other elements are stipulated in the agreement between the supplier and the buyer.
1.2.Hardness test method
The sample was first removed from the surface layer by about 0.1 mm, and then the hardness of the wear layer was measured. Each piece is measured at three points (the distance between any two points is greater than 20 mm), and the arithmetic
mean of the three points of hardness is the hardness value of the piece, and the test conditions are as specified in Table 6.
Table 6
Material |
Material thickness mm |
Test Conditions |
test temperature |
AlSn20Cu Alloy |
0.4-1.0 |
HBI/5/30 |
18-24℃ |
>1.0 |
HB2.5/31.25/30 |
||
Steel back |
|
HBI/30/10 |
1.3. Bending test method
The sheet was cut into a 15 mm wide specimen in the rolling direction. First bend the specimen to 180° (the bend radius is equal to the total thickness) and then bend back. During the test, the aluminum alloy and the steel back are bent as one inner layer, respectively,
allowing the sample to break, but the steel back and the aluminum alloy must not be layered.
Q: Why choose NANSEN?
A: Professionally provide package solution for customers from over 20 countries.
Q: What can we expect from NANSEN?
A: Superior quality, reasonable price, exclusive service, and good after sale guarantee.
Q: Can you do customized design and size?
A: Yes, ODM &OEM are available.
Q: Can I have some samples?
A: Of course, samples are (1-3 pcs) or 2-3 kg
Q: When can we get samples and goods?
A: Samples will be sent immediately if have stock, make new will take 2-3days.
Goods will be shipped within 30days after order confirmed.
Q: What's kind of payment can you offer?
A: We can offer L/C, T/T, Western Union, Paypal etc.
Ms.Monica
Shanghai Nansen Industry Co., Ltd.
Address: Pudong District, Shanghai, China.
Tel: 86-21-2024 9001
Wechat /what'app : 0086-13817208624
Email: sales at nansencn. com
Website: www.nansen-bimetal.com