thermostatic radiator valves radiators with cap and adaptor

thermostatic radiator valves  radiators with cap and adaptor

Thermostatic radiator valve in this design is the self-adjustable control valve without needs of external energy , it can be adjusted independently for temperature in each room. And thereby maintaining a constant room temperature required. It features energy-saving and easy to use and so on.

 The working principle of this design of valve is: the liquid temperature sensing element thermostatic valve head is to feel the room air temperature , and thereby changing the heating water flow , so as to regulate and control room temperature :i.e., when the indoor temperature rises , the thermal expansion of the temperature sensing material shall compress to the valve stem to close down the valve up to shut up ,and on the contrary ,the stem shall rebound to open up the valve. In this way, a more comfortable temperature environment for people is achieved.

   Meanwhile, if there is other auxiliary heat source(such as sunshine or other heater etc) in the room, the valve shall close down a little to reduce the water flow into the radiator, and achieve the target of energy-saving in the end.

Instructions:

1. Setting the temperature:

Temperature range: 6-28 °C.

Temperatures will be as follows:

Room temperature ( °C ):  6        12        16        20        24        28

                                           * 1          2         3           4          5

For example, if you wish to set the temperature to 20 °C, choose number 3 and the thermostatic valve will close or open automatically in order to keep the temperature around 20 °C +/- 1 °C.  For higher temperatures, turn to 4 or 5 and for lower ones turn to 1 or 2.

2. Use of “ * “ Mark:

When going out, you can set the valve to “ * “ and it should keep the room at a certain temperature and avoid frost (anti-freeze function).

3. Keep the shell of the thermostatic valve clean and ventilated.  Do not use alcohol or bleach to clean it.

Notes on Installation:

The valve should be placed at the entrance of water into the radiator.  In order for the thermostatic valve to function properly, please make sure it is not covered or blocked by curtains or furniture.