the loading pocket level measurement 100m 4-20mA analog output high resolution laser distance meter
Laser sensors for collision avoidance
Positioning and Detection
Overhead crane
Crane avoidance
Tripper car
Distance between vehicles (mounted in vehicle)
Steel slab detection and positioning
Pipe/tree length cutting system
Camera focusing
Surveillance detection and camera focusing
Vehicle profiling
Fixed point traffic monitor (speed, profiling, length, DBC)
Truck loading system
Parking garage system (open spots, illegal parking)
Bridge height clearance
Ship docking
Targeting systems
In-flight refueling
| Measurement Range |
0.5---100M(Natural Surface) |
0.5---200M(Natural Surface) |
|
Resolution |
1CM |
|
|
Repetition Resolution |
±4CM |
|
|
Measurement Accuracy |
5CM-20CM |
|
|
Laser divergence angle |
4mrad |
|
|
Laser Type |
Class I Semiconductor wavelength 905nm invisible laser and safety to human eye |
|
|
Measurement mode |
measurement by the command , continuous measurement |
|
|
Measurement time |
3-5ms |
|
|
Power Consumption |
< 1W(ranging power) <0.1W(Standby Power) |
|
|
Input Voltage |
5-28VDC |
|
|
Communication interface |
TTL,RS232,RS485,4-20mA,0-5V Optional |
|
|
Temp.Range |
Storage temperature;-40℃to +80℃ Working Temperature;-20℃--60℃or Tailor made -40---70℃ | |
|
Weight |
285g |
|
|
Dimensions |
75mm*60mm*40mm |
|
|
IP Grade |
IP65 | |
|
Power Supply |
Red Line(VCC) |
Black Line (GND) |
|
RS232 |
Green-TX |
Yellow Line -RX |
|
RS485 |
Green-485A |
Yellow Line-485B |
Kindly Prompt: If need to DB9 Female head, so TX,RX and G will be corresponding to connection to Second, Third and Fifth base pin of DB9 head separately.
Plug in the power supply, the sensor will be measured automatically. Switch off the power supply, the sensor will be stopped the work
The actual measurement is from the rear-end of the sensor as the starting point, while input voltage is 5V, the current is about 50mA
Command output format:
Baud Rate:19200 Stop Bit :1 Transfer bits:8-bit Odd-even check:No
Output data format:AA XX XX CS FF, among them, AA is data head, FF is data tail,CS is Checksum.
XX XX represents distance value.
Power Supply: Red line(VCC) Black (GND)
4-20MA: Green-LOOP+ Yellow line -LOOP-
0-5V: Green line -LOOP+ Yellow line -LOOP-
PRODUCT APPLICATION CASE:
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier