tarros de crema cosmetica de plastico tarros de crema de ojos chapados en oro rosa

Each part are packed in a PE/EPE foam/bubble bag ,then into a big dust-free bag,outer is five-layer carton,strong enough to resisit long-distrance transportation.

Experience since 2005,UU Packaging Co.,Ltd. is a manufacturer that produce injection plastic containers for skin care packaging.Such as acrylic jars,lotion bottles,airless bottles and other plastic cotainers.we also produce plastic caps and oil caps for glass bottles.

With strictly quality control system,we are sure that our products can pass international AQL quality control test.

1.leakage test:

With colored water, at a temperature of 45 °C pressure of 0.55MPa, pumping for 2 minutes, holding pressure for 3 minutes without leakage phenomenon.

2.Compliance test:

In the case of qualified sealing performance, the product is required to cooperate in place, no sliding teeth phenomenon, while the gap is consistent and the gap in the 0.5mm-2mm.

3.Printing adhesion test:

in the same printing parts, with 3M810 tape or ordinary packaging tape was 45 ° continuous instant stripping 3 times, requiring the printing site without ink off.

4.Spraying performance:

in the jar/bottle blade grid, and then 3M810 tape or ordinary packaging tape was 45 ° continuous instantaneous stripping 1 times, requiring cross-section ≤ 2% off.

Acrylic Jars & Bottles

Airless Bottles 

Plastic  & Metal Spatulas

1.What's the MOQ?

Usually our MOQ is 5000pcs.

If your order is less than 5000pcs,pls email us.

2.Can I print my logo?

Yes.we can do screen printing and hot stamping.The price is reasonable.

if you have your artwork,please email us.

If you don't have artwork,please email us your thoughts,we have designer who can make for you.

Welcome to email us for printing area!

3.What's the delivery time and sampling time?

Sampling time is about 7 days with printing,2-5days with spray coating.Available samples could be sent to you promptly and free of charge.

Delivery time is about 35 days(5 weeks) after order confirmation.

4.What's the payment terms?

For sampling and samples,we accept paypal,westunion and moneygram.

For order,our payment is 30%~50% deposit,the belance before shipment or against bill of lading.

And other payment terms,please email us.

5.New products design and moulding

We have strong ability to deign new products and making new moulds with cost price.

Just sending us the diameter and weight,we can make it reality.