stainless steel pressure gauge
1. INTRODUCTION
Model | Nominal | Accuracy | Connection | Ranges (MPa, ×10bar, x10kgf/cm2)
|
YTH(N)-60 | Φ60(2.5’’) | ±2.5%F.S. | M14×1.5 | Pressure(positive):0~0.1,0.16,0.25,0.4,0.6, |
YTH(N)-100 | Φ100(4’’) |
± |
M20×1.5 | |
YTH(N)-150 | Φ150(6’’) | |||
YTH(N)-200 | Φ200(8’’) | |||
YTH(N)-250 | Φ250(10’’) |
YTH(N) –60,100,150,200,250: Bottom mounting.
YTH(N) – 60Z,100Z,150Z: Back mounting.
YTH(N) – 60ZT,100ZT,150ZT: Back mounting with front flange.
Ambient and medium temperature: YTH: –40℃~70℃, YTHN: –25℃~70℃.
Safety medium temperature: ≤200℃. Recommend install with cooling devices.
Temperature impact: temperature additive errors should not above 0.4%/ ℃ ,when the temperature deviates from 20℃±5℃.
Shake-resiste grade: YTH: GB/T 17214.3 V.H.3 degree.
YTHN: GB/T 17214.3 V.H.4 degree.
Operation pressure: 3/4 F.S.(static pressure), 2/3 F.S.( Fluctuation pressure).
Materials: Case: SUS304 or SUS316L, Movement: SUS304, Measuring element:
SUS316L, Socket: SUS304 or SUS316L, Window: laminated safety glass.
Protection proof: GB4208 idt IEC529 IP66.
Executive standard: GB/T 1226-2010, JB/T 6804-2006.
4. INSTALLATION INSTRUCTIONS
Please check the model and Specifications before installation. Be sure to the pointer should be zero without load.
The SPG should be installed vertically, and try to be at the same horizontal line with the measuring point. Or, you have to count into the additional error. Meanwhile, please keep the distance between the SPG and the measuring point as short as possible.
Shake-proof or air tight case gauge should have a small opening on the rubber plug on the top of the gauge after installation, so that the air pressure could reach inside the gauge and eliminate the additional error because of the pressure difference.
The case should be keep clean. if used for oxygen, it should be prohibited oil.
The axis of the pipe and the gauge should match when installing on the panel. Axis does not coincide may cause failure.
The installation of thread connection type gauge, the wrench should be used on the squared part.
Please open the valve slowing when testing the pressure gauge, so that the pressure is even and not damaging the gauge.
The SPG should be checked regularly during operating period.
Factory picture:
Installation drawing:
Packing: standard original carton
Shipping:by courier,by air,by sea
1.High quality,reasonable price and best service!
2.All products guarantee one year!
3.Welcome customers inspect products and visit office any time!
4.Much appreciated for customers suggestions to our serivice and business items etc.
Certificate of Conformity:
Brife introduction:
This pressure gauge factory belong to Yokogawa Chuanyi and very famous in China with high quality and best price,which pass many inspections and get certificates as above.
There are a few languages in selection,such as English,Russian,France,Spanish,Chinese etc.
If u are interested,welcome contact me.
Angela
Skype:lanlan11688 Whatsapp:+86-13269301734