————————Technical parameter——————— | ||
Applicable medium: | Various conductive liquids | |
Caliber range: | DN3-DN3000 (DN3\DN4 is flange clamping type) | |
Lining type: | Polychloroprene rubber, PTFE, F46, PFA, silicon fluoride, polyurethane rubber | |
Electrode type: | 316L, Ha B, Ha C, titanium, tantalum, platinum-iridium alloy, stainless steel tungsten carbide | |
Pressure range: | 0.6~42Mpa (high pressure needs to be customized) | |
Temperature resistance: | -25~80℃ | |
Accuracy: | ±0.5%, can be customized ±0.3%, ±0.2% | |
Protection level: | Sensor IP65\IP67\IP68 (optional), converter IP65 | |
Output type: | Frequency, pulse, 4-20mA, RS485, Modbus protocol, Hart protocol (optional), Profibus DP (optional), | |
Power supply: | 85~250V, 45~63Hz, 20VDC --- 36VDC |
Liner material | Applications | |
PTFE: | 1.The most steadiest material in plastics which is resistance to boiling hydrochloric acid ,vitriol and aqua regia as well as strong and organic impregnates. 2.Not be perfect in abrasion resistance | Strong corrosive mediums such as strong acid and alkali |
PTF: | Having the same abration resistance with PTFE .Having strong ability of load pressure resistance. | Applicable in state of load pressure |
F46: | 1. Having the same abration resistance with PTFE. 2.Resistance for low abration.3.Having strong resistance to load pressure | 1.The same as PTFE 2.Applicable in medium of low abrasion |
Neoprene: | Be of good elasticity ,retractility and abration resistance 2.Be resistance to low acid ,alkali and salt but not for oxidation medium | Water,sewage and slurry ,mineral serosity of low abration. |
Neoprene: | 1.Be good of abration resistibility (equal to 10 times of caoutchouc) 2.Not be perfect in acid/alkali resistance 3.Can;t be used for water mixted with organic impregnants | Applicable in mineral serosity,slurry and coal slurry of high abration. |