stainless extrusion filter screen pack for liquid filter
- Features: Smooth surface with no sharp edges, burrs or acute angles, anti-abrasive & anti-corrosive, high filtration capacity
- Layers: Single-layer, two layers,multi-layers
- Edge: With or Without Framework
Common Weave Types:
Wire sizes and openings range widely, due to such variety we offer many different weaves. Weave Types are often dictated by the mesh count and wire diameter specifications being used for the product.
The two most common types are:
1. Plain Square Weave
The most common weave, with the same diameter warp and shute wires woven in a simple over and under pattern. It produces screens with the same mesh count in both directions.
2. Twill Square Weave
Each shute wire typically passes over two warp wires and under two, producing square openings. Twill weave can be made from larger-diameter wires than would be possible in a plain square weave to obtain greater strength, density, or corrosion resistance.
3. Other Types: Plain Dutch Weave, Twill Dutch Weave, Reverse Dutch Weave, Twist Weave, Double Twist Weave, etc.
We can choose the best weaving method according to your needs,
please Tell Us Your Thoughts.
|
Mesh Count (m) |
Diameter (mm) |
Aperture (mm) |
Mesh Count (m) |
Diameter (mm) |
Aperture (mm) |
| 10 | ≈0.8 | ≈1.94 | 100 | ≈0.1 | ≈0.15 |
| 16 | ≈0.45 | ≈1.13 | 120 | ≈0.08 | ≈0.13 |
| 20 | ≈0.4 | ≈0.87 | 150 | ≈0.06 | ≈0.1 |
| 24 | ≈0.19 | ≈0.7 | 165 | ≈0.05 | ≈0.1 |
| 30 | ≈0.25 | ≈0.596 | 180 | ≈0.05 | ≈0.09 |
| 35 | ≈0.25 | ≈0.478 | 200 | ≈0.05 | ≈0.08 |
| 40 | ≈0.17 | ≈0.465 | 250 | ≈0.04 | ≈0.06 |
| 50 | ≈0.17 | ≈0.338 | 300 | ≈0.04 | ≈0.045 |
| 60 | ≈0.12 | ≈0.3 | 325 | ≈0.035 | ≈0.04 |
| 80 | ≈0.12 | ≈0.2 | 350 | ≈0.03 | ≈0.04 |
| 80 | ≈0.14 | ≈0.16 | 400 | ≈0.03 | ≈0.034 |
If you are interested in the products, please contact us!
You can find us on Alibaba.com or website, E-mail, and instant messaging software.
Specifications Required Upon Ordering:
- Material
- Wave
- Diameter(d)
- Aperture (a): the distance between two parallel wires (in millimeter)
- Mesh Count (m): the number of mesh holes within one inch.
- Pitch (p): the distance between the centers of two adjacent wires (in millimeter).
- Width & length
- Quantity
- Edge Treatment
Other Products
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier