1.Description of soft liquid silicone rubber for silicone reborn baby dolls
RT-805 Silicone rubber is platinum cure silicone rubber for mold making and silicone products. The silicone rubber will be cured under room temperature and can be cured fastly by heating, It’s two-components liquid silicone rubber , the mixing ratio is 1:1 . It has an exceptional fluidity and good operability.Especially ,the platinum cure silicone rubber has a lower shrinkage,higher temperature resistance and it is food grade.
2.Characteristics of soft liquid silicone rubber for silicone reborn baby dolls
*An exceptional fluidity and good operability
*Good tensile strength and tear strength
*Food grade silicone rubber
*high temperature resistance
*good flexibility
*No smell ,non-toxic
*long shelf-time &lifetime
*Lower shrinkage
2.Application of soft liquid silicone rubber for silicone reborn baby dolls
RT-805 silicone rubber is medical grade silicone rubber with very soft hardness....G805 is suitable to make sexy silicone doll , silicone penis ,sexy dildo , silicone breast ,silicone vagina ,etc..Especially, G805 is also suitable to make artificial limbs , human mask making , silicone hands , silicone ears , etc...
3.Datesheet of soft liquid silicone rubber for silicone reborn baby dolls
Item No. | Appearance | Hardness (shore A°) | Viscosity (CPS) | Tensile-strength( kgf /cm2 ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Mixing ratio | operation time (25 ℃ ) | Curing time( 25 ℃) | shrinkage |
RT-805 | skin color | 5±2 | 3000±1000 | ≥35 | ≥10 | ≥300 | 1:1 | 20-30 mins | 2~3 h | ≤0.1% |
5.Operating instructions of soft liquid silicone rubber for silicone reborn baby dolls
Step 1: prepare and clean the prototype.
You must make sure your original molds perfect. fix the original mold on a board , then using some assistant material(like cardpaper) to make a frame for to surround the prototype. The frame is no need ,if we make the mold by brushing way .
Step 2: Take the silicone and catalyst as the ratio1:1 (part A:part B=1:1) ,mix the silicone rubber and catalyst evenly.
*Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will bring troubles for your final operation. What’s more, the finished molds will have a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.
Step 4: Pouring cast or brushing cast
After released the bubble, we can pour/brush the silicone rubber on the prototype
*Notes:Please finished all the steped within the operation time .If not it will cause cross linking reaction, and no more further steps will be available.So,we have to pay attention to the pot life and curing time.
Packing:
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
25KG/drum vacuum packing for part A + 25KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
Shipping
(1) With us your money in safe, your business in safe.
(2) Free sample for testing.
(3) Competitive price.
(4) Strict Q/C (quality of control) management system.
(5) Enough production capacity and timely delivery.
(6) We support customized package and product.
(7) Prompt shipment with professional documents.
(8) Offering professional technical support.
(9) We can make confidentiality agreement with our customs.
(10) We will be here whenever you need.