Welcome to TradeChina
smart refrigerator cabinet door lock electronic locks KL-DDS06
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meo Food Co., Ltd.
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
0-30%
Nearest Port
Penang, Valparaiso,Jetta
Accepted Delivery Terms
Employees
501-1000 people
Accepted Payment Currency
USD,EUR
Average Lead Time
5 Day(s)
Certifications
Product Specifications
Model Number
KL-DDS06
Product Description
Product Description
smart e-lock refrigerator cabinet door lock electronic locks KL-DDS06
KL-DDS06 is a remote control lock kit for sliding door refrigerator. It is used to lock/unlock the fridge doors. The operation distance is up to 100 meters(1). This device is widely used on different sliding doors of refrigerators or other places.
Parameter | |
Output | DC12V |
Standby Current | 5mA |
Sensitivity | -105dBm |
Dimension | 110*58*47mm (Controller) |
Rated Current | 1A |
Operating Voltage | AC85V-220V |
Frequency | 433.92MHz |
Programmable remote
Remote control KL300-1
It's the specified remote which work with KL-DDS06
Working Voltage: DC12V
Receive Current:12mA
Dimension: 58*38*14mm
Frequency: 315MHz/433.92MHz
Working Voltage: DC12V
Receive Current:12mA
Dimension: 58*38*14mm
Frequency: 315MHz/433.92MHz
Instruction Description
1.Program: Press and hold the learning button till the LED blinks, then release. Press any button of remote control, LED OFF.
Program is done. Maximum 10 remote controls can be programed.
2.Clear memory: Press and hold the learning button until LED from ON to OFF, then release. All stored remote controls’ ID will be
cleared.
3.Using:
1) Press button A of the remote control, the two locks unlock at same time, and buzzer rarely beeps. After 5 seconds, it re-lock
again.
2) Press button B to lock before 5 seconds.
3) User can keep it always unlock by the key manually when power off.
Program is done. Maximum 10 remote controls can be programed.
2.Clear memory: Press and hold the learning button until LED from ON to OFF, then release. All stored remote controls’ ID will be
cleared.
3.Using:
1) Press button A of the remote control, the two locks unlock at same time, and buzzer rarely beeps. After 5 seconds, it re-lock
again.
2) Press button B to lock before 5 seconds.
3) User can keep it always unlock by the key manually when power off.
Attention
Please don't press button A and B at same time, otherwise, it may damage the receiver.
(1): The operation distance is measured LOS (line of sight) with little radio interference, actual distance may vary greatly
depending on the installation and operating environment.
(1): The operation distance is measured LOS (line of sight) with little radio interference, actual distance may vary greatly
depending on the installation and operating environment.
Related Products
Company Introduction
Packing&Shipping
Packing List:
Remote Controller(KL-DDS06) *1pc
Remote control (KL600-2) *1pc (with built-in battery and wall holder)
Lock & Spring Bolt *2sets (with 185cm power cable pre-installed)
Output Cable *2pairs (18cm, pre-installed)
Key *2pcs
Metal Holders * 4pcs
Iron Wire Key *2pcs
Remote control (KL600-2) *1pc (with built-in battery and wall holder)
Lock & Spring Bolt *2sets (with 185cm power cable pre-installed)
Output Cable *2pairs (18cm, pre-installed)
Key *2pcs
Metal Holders * 4pcs
Iron Wire Key *2pcs
FAQ
What do you want to know?
Q1: The distance is real ? did you test ?
A1: Yes,we tested on the coast even the distance up to 100m.
Q2: How many pieces so controller can work at lock?
A2: 1 controller can work with 2 locks.
Q3:Do you have any certification like CE or FCC ?
A3: Not yet, but we can do the certifications.
A1: Yes,we tested on the coast even the distance up to 100m.
Q2: How many pieces so controller can work at lock?
A2: 1 controller can work with 2 locks.
Q3:Do you have any certification like CE or FCC ?
A3: Not yet, but we can do the certifications.
Q4: Can you print our model number on remote control even logo on enclosure?
A4: Yes and we offer OEM/ODM if you need .We're not only manufacturer but also have R&D who can finish these work well.
Q5: Can we use remote control or controller which made by other manufacturer ?
A5: We don't suggest to do so because our's code is unique.
A4: Yes and we offer OEM/ODM if you need .We're not only manufacturer but also have R&D who can finish these work well.
Q5: Can we use remote control or controller which made by other manufacturer ?
A5: We don't suggest to do so because our's code is unique.
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier