sliding gates automatic and automatic gate for school and hospital entrance or parking lot

Features:

1. The gate is made of high quality imported aluminum material with compact structure.

2. The gate can be disassemble and pack in groups, convenient for transportation and easy to install on site.

3. The gate does not need any wheels and rails, it makes suspension movement. It generate less noise compare to wheel and rail gates.

4. The gate come with caution lamp, it will rotate during gate in operation mode, to increase safety awareness.

5.The gate also equip with anti-collision function, when there is obstacle detected from 12m 15m distance during closing mode, the gate will automatically retrieve and stop for 2 seconds.

6. The gate also equip with anti-bumping function, when the pressure sensor is activated, it will transmit a signal to the master control board through solar wireless transmission module.

7. The gate also equip with anti-climb alarm system, when there is obstacle on top of the gates, the alarm system will turn on siren.

8. In case of power failure, the gate come with a unique key to unlock the clutch in order to manually open/close the gate.

9. Running speed of the gate: 20m-25m per minute.

Drawings

Material Specification

Technical Specification

Package 

Customized package for sliding gate, their material is iron frame and plywood. Strong protection of sliding gate. 

CE certification

P703 series cantilever gate passed CE test. All product can be used in Europe. 

Project Reference 

Two sliding gate for entrance of bank 

Workshop of sliding gate