Hollow Spindle Sealing Feed-throughs
Model No. Bearing Hollow Spindle Diameter
HTZ010NG 6003 10mm
HTZ020NG 6906 20mm
HTZ025NG 6907 25mm
HTZ030NG 6908 30mm
HTZ040NG 6810 40mm
HTZ050NG 6912 50mm
HTZ075NG 6918 75mm
Intorudction of magnetic fluid/ferrofluid
Magnetic fluid is an unusual fluid in that it is attracted to a magnet. In the 1960s, NASA developed the magnetic fluid as part of its space programs. Magnetic fluid has three ingredients: ferromagnetic particles such as magnetite and composite ferrite, surfactant, and a base liquid such as water or oil.
The surfactant coats the 10 nm-dia ferromagnetic particles to avoid coagulation and keep them stably dispersed in the base liquid, forming a ferromagnetic fluid. Its dispersibility also remains stable in high magnetic fields.
This photo shows a phenomenon called 'spiking' that occurs when magnetic fluid is placed in a container and a magnet is brought under the container. Magnetic force acting on the surface of the magnetic fluid produces 'spikes', that look like large nails sticking out of the surface.
Vapor pressure - temperature characteristics Vi scosity - temperature characteristics
Magnetic fluid/ferrofluid feedthrougs
Fluid Sealing feed-throughs have been widely used in sealing various vacuum equipments, like, vacuum furnace, sinter furnace, brazier, hardening furnace, heat-treating furnace, monocrystalline silicon furnace, vacuum pump, film-coating machine, chemical gas deposit equipment, ion beam etching machine, molecular pump, ultrahigh-speed centrifugal machine and so on.
Some feedthroughs produced:
Specifications: |
|
Vacuum Degree : | 10-6 Pa |
Leakage Rate : | 10-12 Pa·m3·s-1 |
Pressure Resistance : | 0.2 MPa |
Temperature Range : | 0-80oC |
Sealing Material : | Non-active Gas |
Shell Material : | Non-Magnetic Permeability Stainless Steel |
Spindle(Bush) Material : | Magnetic Permeability Stainless Steel |
Shell Material | Stainless steel or Aluminum |
Water Cooling : | Without / with |
Applications
Silicon grower:
An example of an ultra-high vacuum system with the magnetic rotary seal
We can design special magntice fluid sealing feedthroughs as per customers' equipment requirements.