Multi band triband repeater 900 1800 2100 mhz gsm 2g 3g and 4g mobile network cellphone signal booster repeater amplifier
Please contact me, I will recommend you suitable device!
Contact: Fating
Wechat: Fating1314Lc
Tel: +8618088301737or15969296130
Skype: prosperity9609
Have you ever felt irritable because of the weak signal on your phone?
Who can help you?
The signal booster can help you to solve the problem.
How does it work?
1. The outdoor antenna receives the mobile signal from the signal tower.
2. The booster receives the outside signal from the outside antenna.
3. The booster improve the outside signal and send it to the indoor antenna.
4. The indoor antenna broadcasts the boosted signal to the devices inside the home.
Before buying please note!
1. Make sure the frequency band of your carrier is suitable for this item. Otherwise the device can't work for you. If you do not so clear the frequency of your phone, you could click this link www.frequencycheck.com for check the frequency band of your carriers.
2. Make sure you can receive good signal that you want to amplify on your house outside, which must be can getting 3~5 bar signal (-70dB~-90dB signal strength) on your mobile phone. Please note that the signal booster can only boost the mobile phone network signal, but it does not help to generate any signal. For example, if your outside signal has 0 bar, it can't work or bring you any signal. below is the method of check the mobile phone signal strength.
Technique parameter:
Product name | Mobile signal booster repeater amplifier | |
Function |
1. signal enhancement 2. reduce radiation of cellphones |
|
Application | Home, basement, parking lots, tunnels, hotels etc | |
Network |
GSM/DCS/WCDMA 900/1800/2100MHZ |
|
Frequency range | Uplink | Downlink |
GSM:890~915MHZ DCS:1710~1785MHZ WCDMA:1920~1990MHZ |
GSM:935~960MHZ DCS:1805~1880MHZ WCDMA:2110~2180MHZ |
|
Gain | 60~70bdBi | |
Power | 23~27dBm | |
With fluctuations in | >3db | |
Stray | <-36dbm | |
The third order intermodulation | 9k-1GHZ S-36/1G-12.75GHZ S-30 | |
Power supply |
AC 220V DC12V |
|
Coverage | 500~2000sqm | |
Installation type | wall installation | |
Operating temperature | -10℃~+60℃ | |
Power adapter | EU/US/AU/UK plug | |
Connector type | N female | |
One set includes |
(1) 1pc Signal booster (2) 1pc Outdoor log periodic antenna (3) 1pc Indoor ceiling antenna with 3m cable (4) 1pc 10m cable with connector (5) 1pc Power adaptor (6) 1pc User manual |
Picture show:
Optional accessories:
Outdoor Yagi antenna, outdoor log periodic antenna, panel antenna, outdoor Omni-directional antenna, indoor ceiling antenna, 2 way splitter, 3 way splitter, 4 way splitter, attenuator, connector, cable, lightning arrester, coupler etc. |
Installation diagram:
Easy 4 steps of installtion:
1. Find an appropriate position where can getting strong mobile signal to install the outdoor antenna and toward to the cell signal tower. (Usually install it on the roof or balcony and at least 3 bars signal indicated on your phone display.) 2. Connect the outdoor antenna to the signal booster via the cable. 3. Connect the indoor antenna to the signal booster. 4. Check all the connectors is tightened then plug in power. Done! |
Attention:
(1) Please make sure the outdoor antenna is well isolated with the indoor antenna(s). They should not be on the same horizontal line. The outdoor antenna should be on the housetop, at least 10 meters far away from the indoor antenna(s), better with stairs or wall(s) in between. Put the indoor antenna(s) in the middle of room, far away from the window and door. |
(2) If still no signal reception after activating repeater, please check if outdoor antenna points to signal tower or elsewhere have strong signal and check if strength achieve -70dBm. Please adjust the direction of the outdoor antenna until it catches good and steady signal. To ensure the result, the outdoor signal should be as strong as possible. |
(3) More indoor antennas and splitters/couplers are needed for bigger indoor coverage as one indoor antenna can cover around 100~250 square meters installation diagram for more indoor antennas. |
Application:
(1) We have own factory in Shenzhen city.
(2) High quality & timely delivery.
(3) OEM/ODM orders are available.
(4) Optional network (GSM 2G 3G 4G LTE).
(5) Optional frequency band (customized is acceptable).
Single band | Dual band | Triband | Four band |
800MHZ 1900MHZ |
800/900MHZ 800/1800MHZ |
850/900/1800MHZ 800/900/2100MHZ |
800/900/1800/2100MHZ |
Packaging: neutral packing
Shipping method: DHL/UPS/FedEx/EMS/TNT/ARAMEX etc
We provide 1 year warranty for our products. All our products are manufactured with advanced equipment and strict quality control procedures in order to ensure high quality. High quality products, excellent service, reasonable price and timely delivery are our advantages, please feel free to contact us for more information!
Shenzhen North Point Technology Co., Ltd. Is a manufacturer and trader specialized in the research, development and production of 3D night light, Moon light, 3D moon night light, Moon star LED light, signal booster, 2G 3G 4G signal booster. All our products are manufactured with advanced equipment and strict quality control procedures in order to ensure high quality. High quality products, excellent service, reasonable price and timely delivery are our advantages. Customized orders are welcomed. Please contact us any time for more information!
Contact: Fating
Wechat: Fating1314Lc
Skype: prosperity9609
whatsApp: (+86)18088301737or15969296130