seven meters long 25 to 30 passenger seats coaster minibuses for sale (also available for assembling):
1. gasoline engine
2. rear wheel drive
3. manual transmission
4. 25+5 seats
seven meters long 25 to 30 passenger seats coaster minibuses for sale: 1. gasoline engine; 2. rear wheel drive; 3. manual transmission; 4. can set 25+5 seats in total
seven meters long 25 to 30 passenger seats coaster minibuses for sale (also available for assembling)
Specification / Description of the product---seven meters long 25 to 30 passenger seats coaster minibuses for sale (also available for assembling):
Dimension (mm) | 7235*2050*2650 | Kerb/Gross weight (kg) | 4500/7000 |
Max Speed (km/h) | 100 | App/Dep(O) | 17/13 |
Wheel Track (mm) | 1830/1650 | Wheel Base (mm) | 3935 |
Engine | EQB125-20 Dongfeng Cummins | Seat Capacity | 1 +24 (+ 5 Folding) |
Steering | Power Steering | Seat type | Fabric seat |
Clutch | Single, Dry, Diaphragm | Rearview Mirror | Manual, |
Transmission | 5 forward+1 reverse | Passenger door | Manual |
Brake |
Hydraulic Brake | Suspension | Leaf spring |
Tire | 7.00R16 | A/C | Optional |
Others: | Tinted Glasses, Fire Extinguisher, Mp3 Radio |
Pictures of this "seven meters long 25 to 30 passenger seats coaster minibuses for sale (also available for assembling)":
Detailes - inner and outer side of the "seven meters long 25 to 30 passenger seats coaster minibuses for sale (also available for assembling)":
The coaster minibuses for sale usually shipped by RORO, our drivers will drive the coaster minibuses for sale to the RORO loading port, and then drive it onto the RORO by the RORO ship workers when the RORO reaches the port.
In the SKD/CKD vehicle assembly project, our Chinese company will provide technology support to your company, by sending engineers and technicians to your place to train your workers and pass on knowledge to them, including but not limited to the vehicle manufacturing skills, management system of the vehicle assembly factory, etc.; in the meantime, our group will supply the complete sets of SKD/CKD kits vehicles for being re-assembled in your local place as well as the assembly line or production line equipments; and the equipment layout design of the factory, ... ...
Brief introduction of our "China Big Group Company":
Our company is focusing on the the auto assembly project throughout the world, so far, we have successfully set up several such assembly plants separately in Syria, Ghana, Seychelles, Vanuatu, etc., assembling, producing and manufacturing different types and models of vehicles, following is our main products and supplies:
1) Pickup Truck: Single & Double Cabin; Gasoline & Diesel; 4x2 & 4x4; LHD & RHD;
2) Off-Road SUV: 5-7 seats; Gasoline & Diesel; 4x2 & 4x4; LHD & RHD;
3) Passenger Van: 7-8 seats, 9-15 seats, Gasoline & Diesel; 4x2; LHD & RHD;
4) Mini Moko: Gasoline & Electric, 4x2 front wheel drive (gasoline) & rear wheel drive (electric), LHD & RHD;
5) Bus: Mini Bus, City Bus, and Long-Distance Bus;
6) Providing complete set of assembly equipments of the above mentioned automobiles.
1. What can we get from this californian mini moke assembly project?
1) Chinese automobile themselves have much higher cost performance and much stronger market competitiveness than the Japanese, American, Korean and other developed countries' auto products. (advantages about 20-30%)
2) Reduction of the import customs duty, by comparing SKD/CKD to CBU, it is around a gap of 25-35% at least, this is the profit of your plant. (save 25-35%)
3) With SKD/CKD status, you can save freight cost, (however, for some types of vehicles, for example, the mini van and mini bus / bus in SKD, the shipping cost is the not the first important factor, or maybe the shipping charges will be increased, but the duty is lowered down), about 5-10% of the total value. (save 5-10%)
4) Spare Parts Trading for after-sales service: a new Profit growth point; while you developing market, you can supply very nice after-sales service by setting up 4S shop with the plant technology supply and our assistance. In general, the spare parts trading takes up arount 30--50% of the total value. (profit 30-50%)
5) Your own auto brand, intangible assets is another economic growth point. (Rise total value by over 50%)
2. What's the conditions of the partner we are looking for?
1) Investment Power Requirement: over 1 million USD for initial investment (for equipments only);
2) Land or Workshop Requirement: over 15000-20000 square meters land including 5000 square meter workshop;
3) Software Requirements: Good Automobile Sales Channel, Familiar with Automobile Industry and Its Business, or Ralated business line;
4) Hardware Requirements on the Import Tariff: this is the most important factor, the difference gap between auto spare part CKD (completely knocked down) and CBU (complete built unit) shall be at least 30-35%, for example, import tariff on CBU is 35%, it must be 5% or zero on CKD.
5) Good relationship with the local government, can get good / preferential policies from the government, or may odtain government orders for the assembly project and the plant, actually, bus is a public transportation industry, the order needs an organization or government to support, this will be a very important factor for the plant's developing and expanding.
3. What about the after-sales service?
1) Found a professional automobile "Repair & Maintenance" service company to ensure the After-Sales Service;
2) Spare parts supply;
3) Driving & repairing training guidance;
4) Technical advisory and training;
5) Market data feedback and disposing;
6) The most important - Technology Support.
To summarize, the above three (3) points are the reasons that why this vehicle assembly project can be successful in most of the countries, why we can succeed!!
4. What is CBU, SKD and CKD?
As usual, following is the common definition of the three terms:
CBU = Complete Built Unit, i.e. finished automobile
CKD = Completely Knocked down parts . All materials supplied are loose for final welding and final assembly, or raw body shell with all other parts loose and not assembled.
SKD I = Semi knocked down parts. Car body and trucks cabin are unpainted. The engine, gearbox, axles, suspension, driveshaft, steering, seats, tyres, batteries, exhaust system, electrical parts, etc. are supplied as individual units for assembly.
SKD II = Car body is fully painted and glazed. Truck cabin is fully painted. The engine, gearbox, axles, suspension, driveshaft, steering, seats, tyres, batteries, exhaust system, electrical parts, etc. are supplied as individual units for assembly.
You must make sure which definition is accepted by your local customs for less tarrif, this is very important !!
Bus Plant Production & Assembly Line Layout Design Draft:
The Manufacturing Process of the Bus Plant:
Join us, you will see how to work with us on this business, we can also help you to establish the assembling plant in your local place if you are interested, both complete set of coaster minibuses for sale knocked down kits, assembly equipment and assembling technology are available.
Looking forward to your cooperation !!!
Contact:
Lucky Peng (Ms.)
yingqingpeng at china-big dot com dot cn
Skype: chongqingbig
Whatsapp: 15223551381