Model Number | FR100RD | FR200RD | FR300RD |
Coil Length | 315mm | 630mm | 950mm |
Coil Inside Dia. | φ100mm | φ200mm | φ300mm |
Weight | 80g | 100g | 120g |
Function | Test AC leakage current, high current, high harmonic current, complex waveform current, transient inrush current, phase, power, power, power factor, etc. |
Test mode | Flexible CT: The output signal is the current-to-time differential. By integrating the output voltage signal, the input current can be truly restored. |
Coil diameter | φ8mm |
Range | 0A~10kA |
Resolution | 0.1A |
Output | 0.3mV/A 3mV/A 30mV/A third gear (can be customized for 0-5V, 4-20mA, etc.) |
Power supply | 9V 6F22 battery |
Low battery indication | Have |
Power consumption | 6 mA at voltage output, an alkaline dry battery is expected to be powered continuously for 80 hours |
Accuracy level | ±1.0%FS (50Hz/60Hz);23℃±2℃,below 70%RH,the wire is at the center of the coil) |
Phase error | ≤1°(50Hz/60Hz;23℃±2℃) |
Initial phase | 90° |
Output interface | BNC connector (optional audio plug, banana plug, bare wire) |
Output line length | 2m |
Electric field interference | No hysteresis effect, no external electric field interference |
Wire position | The tested wire is at the center of the coil, and the position error affects ≤±0.3%FS |
Response frequency | 0.1Hz~10MHz |
Line voltage | Tested below AC 1000V |
Working temperature and humidity | -20℃~50℃;below 80%rh |
Storage temperature and humidity | -10℃~60℃;below 70%rh |
Insulation strength | AC 2000V/rms(Both ends of the coil) |
Suitable for safety regulations | IEC1010-1、IEC1010-2-032、pollution level 2、CAT IV 1000V |
Random attachment | Sensor: 1 piece |