semi-automatic high precision glue dispensing machine

Model

JL-DB01

Power supply

AC220V 50HZ

Air source

<0.99MPa

Spit pressure

0.05MPa-0.99MPa

Spit time

Can adjust DIP program switch

Function mode

Manual mode / semi-automatic mode (quantitative dispensing)

Vacuum back suction function

Adjustable negative pressure control to 600 mm

Repeat accuracy

Accuracy plus or minus 0.05%, flat rate 600 times / minute

Spit

>0.01ml

Parts description

1. Power switch: Turn on the power, and the indicator light will show “ON” position.

2.Air pressure regulator and barometer: control and indicate the air pressure added to the machine (adjust the air handle before adjusting it).

3.Mode switch: put the control circuit in automatic or manual drip injection mode.

4, timing control: adjust the duration of drip injection.

5. Vacuum control: Adjust the vacuum back-pumping intensity applied to the air circuit.

6. Breathing light: Quickly linked breathing thunder hole.

7, foot switch socket: access to the foot switch.

8. Intake pipe: high pressure air inlet.

9, injection drip volume bins: divide the injection drip duration into four blocks.