sawdust charcoal machine/rice hull charcoal making machine

bamboo charcoal making machine/bamboo charcoal machine                       

Let's make charcoal today!!! 

The raw material canbe weed tree, straw, rice straw, rice bran powder, peanut shells/hulls, pinewood/pine wood residues, floor powder, bamboo powder, hemp fibre, waste paper/newspaper, reed canary grass, sunflower husk seed shell, switchgrass etc.

Fineness: <5mm  Moisture: 12%.

Hammer mill

The raw material for making charcoal is better less than 5-8mm, if more than8mm, then you need to use the crusher to crush them in the first place.

Accessories: cyclone and fan, hammer sheets and plates.

Sawdust dryer

This Air Current Type dryer can reduce the humidity of wood materials below 12% per time. The Cost of this Air Current dryer is much lower than Rotary dryer. It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintenance, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.

Part two: Briquetting

 Chrcoal machine

Briquetting is a process during which biomass is compressed under high pressure and high temperature. After the processing of drying and pressing, the biomass briquette is characterized by high density, small in size, better combustion, capable as the substitute for the superior coal or firewood.

Spare parts of charcoal machine

Semi-product

Part three: Carbonizing

Carbonization furnace

Carbonization furnace for biomass charcoal can greatly increased carbonizing ratio (increased from about 88% to 99%) and shortened the carbonizing time (from 24 hours to 6 hours), and shows the features of easy operation, higher safety, high efficiency, and energy saving. This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization.

Packaging & Shipping

Technical service

(1) Design for production line flow and equipment layout freely according to the site.

(2) Supply the foundation drawing of equipment.

(3) Supply the technical parameters of peripheral equipment.

(4) During the operation, we can offer the technology service freely if the user needs to adjust the layout and application.

(5) During the operation, we only collect the cost if the user willing to upgrade the equipment when we have the advantage technology.