round pipe Polishing Machine / SS Tube Polishing Machine /mirror buffing machine for stainless steel

 round pipe  Polishing Machine / SS Tube Polishing Machine /mirror buffing machine for stainless steel  

wechat/whatsapp +86 15093228930 

Introduction

 Stainless steel tubes pipes polishing machine is for metal plating, auto parts, machinery manufacturing, decoration and decoration industries of various shaft, pipe parts and rod outside round surface polishing and drawing. solvinig the problem of rust ,paint dorp,scratch ,peroxidation on the surface of metal tubes pipes .

features

 1 The structure is simple and easy to operate, suitable for polishing and polishing of slender, large and short diameter workpieces, and is especially suitable for processing ultra-fine diameter workpieces.
2The speed of guide wheels can be adjusted to meet the requirements of grinding and polishing of workpieces with different diameters and different speeds.

3 optional installation of cooling and dust removal system, can be installed wheel.

Application

 electroplating, hardware, mold processing, gas spring rod, hydraulic accessories, copper pipes, aluminum pipes, stainless steel pipes, handicraft processing, steel furniture, tracheon, vehicle accessories and other circular polishing industry. The equipment can polish, Rust, wire, grind, and deoxidize the pipes and rods of various materials, such as iron, copper, zinc alloy, aluminum alloy, stainless steel, titanium alloy and so on.

parameters

operation tips 

(1) Changing the polishing of round tubes pipes of different diameters requires the following adjustments to the round tube polishing machine.
(2) Adjust the height of the motherboard, so that the center height of the workpiece is consistent with the center height of the guide wheel and the center height of the gauze  wheel, and lock the motherboard.
(3) Adjustment method: Put the round tube into the host(the host should be parked) and exit the grinding head. Release the fastening screw to the center of the tube and the guide wheel, and then tighten the fastening screw.
(4) Before the first piece of polishing is driven, it is necessary to check whether the position of each polishing grinding head is withdrawn to avoid damage to the machine parts due to excessive cutting of the grinding head.
(5) The speed of the speed regulating motor of the driving steering wheel should be from low to high to avoid accidental failure.
(6) round tubes pipes with large Bending  should be straightened before polishing.
(7) To achieve an economically reasonable polishing effect, it is not only necessary to reasonably select the polishing cut amount, but also to select the number of grinding heads participating in the workpiece according to the original surface conditions. If the surface condition of the round pipe is good, the polishing grinding head participating in the workpiece can be reduced.

pictures

polishing wheels

for different polishing purpose , Multi-leaf wheel ,nylon wheel, cloth wheel, hemp wheel wool wheel and Silicon carbide mirror polishing wheel can be chose from .

working effect show 

contact