roll to sheet cutting thin blade slitter cutting machine

If you need buy cutting roll into sheet or pieces thin blade slitter cutting machine, We are best supplier for you. We are a factory of design and producing auto roll cutting machine, which is used to cut roll material into sheet or pieces. 

We have different sizes of machines for different custiomers request. Those cutting machines can handle different width size roll materials.

Our factory have below advantages:

1. We have different sizes machines for your option. At present our cutting machine can cut roll width from 1mm to 1500mm. It mean as long as your material roll width is within 1500mm, we always have a machine can meet your need.

2. We can provide you high precision cutting machine to you. The precision of our sensor cutting machine can reach 0.02mm, you know this precision is very high. Because common cutting machine precision only can reach 0.1mm.

3. We can provide specail function cutting machine to you, if you need. Our cutting machine not only can have cutting roll into sheet function, but also can add some special functions to meet customer special request, such as cutting & rewinding, cutting & sealing, crosscut+(rip cutting), Punching cutting, beveling cutting, sensor  fixed position cutting, cutting & waste discharge etc.

You may want to know what material our cutting machine can cut?

Our answer: As long as your material is roll, and you want to cut it into sheet or pieces, our machine can work for you perfect. I would like to share some cutting able materials on our machine as follow:

1.Tube/pipe/hose: PVC tube/pipe/hose, heat shrink tube/pipe/hose, braided tube/pipe/hose, fiberglass tube/pipe/hose, Teflon tube/pipe/hose, corrugated tube/pipe/hose, mesh tube/pipe/hose, sponge tube/pipe/hose, silicone hose, etc.

2.Cable/rope: Flat cable, copper wire, nylon rope, ribbon cable, etc.

3.Tape/belt/band: ribbon, belt, webbing, label, rubber band, nickel strap, cotton tape, elastic band, plastic tape, zipper, conductive tape, foam, double-sided tape, etc.

4.Sheet: foam sheet, Nickel sheet, diffuser sheet, plastic/rubber sheet, pvc sheet, etc.

5.Film/foil: plastic film, reflecting film, insulation paper, PE, Copper/Aluminum foil, release paper, etc.

In fact This cutting machine have series for option for cutting different size roll material request, if you want to know their detail , don't hesitate contact us.

8 advantages of cutting machinefor cutting roll into sheet or pieces as follow:

1.     High-precision Cutting.

2.     Stable Cutting.

3.     Fast cutting.

4.     Less loss Cutting . 

5.     No rough selvedge Cutting. 

6.     No Scraping Cutting. 

7.     Smooth Cutting . 

8.     Easy operating. 

cutting machine for cutting roll into sheet or pieces Technical Data:

1.Product Name: cutting machine for cutting roll into sheet or pieces

2.Power supply: 220V /110V

3.Cutting length:  1-9999mm

4.Operating Language: English

5.If this cutting machines specification can't meet your need on cutting, contact us, we can customerized design one for you.

Why you need the cutting machine for cutting roll into sheet or pieces?

1.The machine can make your factory production more efficient. The machine can improve your production 10 times faster than manual.

2.The machine cut      out more accurate than the one by hand, so your product would be more beautiful. It would help you to get order too. No customer like those not neatly product. You know manual easy to make out not neatly defective product especially in mass produce. Don't let it damage your product reputation in your customers' eyes. It would also make you loose order.

3.Save labor cost. Because the machine work same as ten workers. As long as you have this machine, you don't need to employee 10 workers anymore, so you can save 10 workers' salary.

cutting machine for cutting roll into sheet or pieces Features:

1.Automatic stopping if materials run out of supply.

2.Memory: length, QTY & speed are in memory, not erased even if power off & on.

3.High speed, high accuracy, designed for cutting roll materials.

4.High speed: It can cut 100~160 cut per minute(50mm long).

5.Accuracy: sleeve cutting machine can be set between 0.1-9999.9mm.

6.Cutting type: cold cut and hot cut Optional.

7.Automatic operating: after setting length and quantity, it can automatically work. Save labor, energy, high efficiency.

cutting machine for cutting roll into sheet or pieces detail photoes show:

FAQ

Some question you may concern about this cutting machine for cutting roll into sheet or pieces as follow:

1. What about the warranty for this auto cutting machine?

The warranty is 1 years. We provide life-long service. Whenever you need help, just contact us.

2.What about the lead time for cutter machine?

Some models of our machines are in stock, they can ship out to you within 1-2 days after getting your payment.

3. Is the cutting machine for cutting roll into sheet or pieces an automatic machine?

Yes, it is an automatic cutting machine. You just need to set cut length and cut quality, it will feed and cut automatically.

4. What about the language of the panel and user manual of  the cutting machine?

The panel, manual and software will be all in English. So the user all around the world can use it conveniently.