Model(DCS) | 07PC | 08D | 10D | 10D-2 | 10PC | 13DV1 |
1. The welding head form diversification, can quickly solve difficult soldering process;
2. High precision thermocouple located at the most front end welding head, so can sensor to the welding head front-end subtle variations in temperature;
3.6 seconds can reach 300 degrees Celsius;
4. The card design of the welding head can be replaced rapidly and convenient easy, DCS series welding head unibody design, can save 50% of the material cost;
5. DCN series can be directly installed blowing nitrogen cassette tip: integrating nitrogen gas nozzle and the welding head is an organic whole, can be after preheating of nitrogen by welding head blow out tip, use a small amount of nitrogen can achieve the best welding effect, this product is very suitable for lead-free soldering;
6. A quick rebound welding head can be installed throughout the TM series models, "lead-free solder" trend in the future by design;
APOLLO SEIKO welding head will not special TM welding temperature increase too much, and can be in accordance with the requirements of different processes a variety of shapes, in order to enhance the quality of the welding work, as to meet the requirements of different kinds of welding.