refrigeration parts heat exchanger suction line accumulator

Refrigeration parts heat exchanger suction line accumulator

Application

In the cooling system,it is separated high pressure and low pressure about the refrigerant flowing pipeline. The refrigerant which is higher temperature in the high pressure pipeline would be cooled via the condenser ,but the refrigerant which is lower temperature via the evaporator would be separated gas and liquid in the suction line accumulator. the liquid refrigerant would be evaporated into full gaseity by the heat and enter into the compressor .it prevent slugging the compressor by liquid refrigerant ,so that the lifetime of the compressor is longer.

How to work 

The high pressure and temperature refrigerant need cooling in one pipeline and the low pressure and temperature refrigerant need heating for gaseity, these two pipelines are concentrated in a vessel. it would be mutually conducted by high temperature and low temperature. so the refrigerant which needs to heat obtain energy for gasifying and the refrigerant which need to cool obtain low temperature. After hot –cool exchanging, the efficiency of the system would be increasing, and the refrigeration effect would be reached best.

Main feature

• The firm steel shells for long life
• High resistant corrosion paint power coating finish
• Max.working pressure:2.8MPa,the burst pressure 17.5MPa
• It is strongly commended to install the heat exchanger accumulator when the evapour temperature is lower than -15^o C in the refrigeration system
• It is suitable with HFC,HCFC,CFC refrigerant and with associated oils