We are looking for long term cooperation with customer. Therefore, if there is any quality feedback, we shall provide technical support and after sales service promptly. Easy to wear off parts list for each model is available upon customer's request. Service parts shall be sent along with each complete truck as well to ensure easy maintenance and service of each truck.
9.1 Body of the case Yes
9.2 maximum internal Dimensions l 5100 x W 2200 x H 2200
9.3 Height above all to comply with the Highway Code
9.4 Panels Design Non-CFC polyurethane polyester sandwich
9.5. Wall thickness (mm) At least minimum
sides 100
Roof 115
Floor 129
Front 100
rear Door 100
9.6 front panel designed to receive refrigeration unit
9.7 Profile of the aluminum cell at the bottom and top of the cell (reinforced)
9.8 Front and rear frames in stainless steel, satin, Matt
9.9 rear frame with crushed low edge rail
10 Refrigeration cell Layout
10.1 right floor with non-slip polyester top Coat grey coating
10.2 Aluminum baseboard dovetail 250x80 in foot of walls (side + front)
10.3 Flow Siphon One (1) to the right front
10.4 rails and hooks for suspensions of carcases presented in half and/or quarters (carcasses shall not be touched)
10.5 Aluminium threshold 50 mm and thermal bridge fracture joint
10.6 Sliding stepladder for access to refrigeration cell
11. Doors and electricity of the refrigeration cell
11.1 opening total two rear flaps Yes
11.2 hinges aluminium, stainless steel closure, rubber ring gasket Yes
11.3 pair of door stops at 270 Yes
11.4 lateral Protection of The height of the rear door stops Yes
11.5 Yes 11.6 gauge and front and rear LED side lights
11.7 interior illumination two recessed ceiling lights in the longitudinal axis + control
11.8 Outdoor lighting complying with the Highway Code
12 Refrigeration cell Supply Group
12.1 Energy and commissioning of the cold unit included Yes
12.2 mixed power supply energy (on petrol and electricity)
12.3 Evaporator protection in the unit Yes
12.4 stainless steel range of access to the refrigeration unit group Yes
12.5 stainless steel ladder of access to the cabin group Yes
12.6 Assembly and commissioning of the refrigeration unit included Yes
1.The advanatages of Truck Bodies
1).It is made of GRP and PU foam with all-closed structure that the GRP (Glass Reinforced Plastic Fiber) outside and PU foam in the core
2).Light in weight:40% lighter than metal body.
3).it is be good at strength and long life.
4).Non-corrosion, non-pollution, anti-brine, acid and soda-resisting
5).The panel used for the truck body was constructed in type of sandwich.
6).The thermal insulation layer is 50-80mm thick, which offers a very good thermal insulation performance.
1)Outer/inner skin is FRP panel
2)polyurethane insulated ,PU foam density 42-45kg/m3
3)304 stainless steel locks ,hinges,door frame, wrap angle
4) aluminium alloy Edge Protector
5)EPDM rubber door seal
6)thickness: 62mm ,82mm,102mm or other special demands, body size as you demanded
7)side door is optional
8)Light in weight: 40% lighter than metal body.
9) Better insulation: K value less than 0.3w/m2k..
10)High in strength and long life: 5 times longer than metal body.
11)Non-corrosion, non-pollution, anti-brine, acid and soda-resisting.
12)Easy to be assembled and repaired at site.
Our products can be shipped in CBU (completely built up) and CKD (completely knock down) type
Temperature range,-18°C--+25°C,special request reach to -40°C
The Thickness
1)Front wall panel:85mm
2)Rear wall panel:85mm
3)Side wall panel:85mm
4)Roof wall panel:105mm
5)Floor wall panel:105mm
6)With the dimensions, the truck body can be the best Refrigeration Effect. But we also can change the Thickness by your requirements. And the thickness range is from 25mm to 150mm
Truck body, FRP truck body, FRP refrigerated truck body, FRP Cargo box, FRP truck box, FRP insulated truck body, reefer van body,
reefer truck body, Truck body panels, CKD truck body, Freezer truck body, isolation truck body, Isolated cargo box, truck box, truck van body, Van truck body, cargo van body, meat transport truck body, truck cold box, truck cool box, REFRIGERATED TRUCK BODY ckd
1)floor:corrugation iron
2)skin:color steel or FRP,GRP ,aluminum
3)panel:sandwich panel
4)insulation panel
5)PU
Truck body meets ISO9001:2008 and CCC certification
Our products can be shipped in CBU (completely built up) and CKD (completely knock down) type, and we can supply assembling manual guide you assemble boxes.
Fixed safety grab handles on rear pillars
LED lights for all front, rear outline marker lights, and licence plate lights
All mudguards, mudflaps, reflectors and marker plates are installed as your requirement.
TRUCK
Truck body panels
CKD truck body panels
Cargo box
truck cargo body
Dry cargo body
Insulated cargo body
Dry truck body
Insulated truck body
FRP truck body
FRP cargo box
Refrigerated truck body
meat transport truck body
Freezer truck body
cargo van body
truck van body
cargo van box
van truck body
van box
Isolated truck body carriage, compartment,truck,wagon box,truck bed