reflow soldering machine 6/8 zones SMD reflow oven for LED Tube bulb light driver PCB SMT assembly line
reflow oven, reflow solder, reflow, reflow soldering oven, smt reflow oven, 8 zones reflow oven
Product model: 8800PC/LS 6600PC/LS 835PC/LS 635PC/LS
Features:
1. The control system adopts PLC, the host computer adopts brand computer, with Windows XP operating system and 18-inch liquid crystal display to ensure the control system is stable and reliable.
2. The control software has strong functions, flexible process parameter control, and temperature curve test function. The Chinese and English operation interface can be switched at any time.
3. Adopt WOGO terminal block; all important electrical components are imported brands, and all signal lines are shielded.
4. The temperature module is self-tuning, the cold end is automatically compensated, and the temperature is controlled at ±2 °C.
5. Equipped with mesh belt tensioning device, the transportation is stable, no jitter, no deformation, ensuring smooth PCB transportation;
6. All heating zones are controlled by PID of temperature control meter (upper 8 temperature zones, lower 8 temperature zones, independent temperature control, separate operation by temperature zone. Zone heating can be started separately to reduce starting power);
7. With fault sound and light alarm function;
8. With leakage protector to ensure the safety of operators and control systems;
9. Built-in removable board and automatic delay shutdown system to ensure that PCB and reflow soldering machine are not damaged when power is off or overheated;
10. Using the world's leading hot air circulation heating method, the temperature is uniform, the heat compensation efficiency is high, the high-efficiency supercharged accelerating air passage, the circulating hot air flow is greatly improved, the temperature rises rapidly (about 20 minutes), and the thermal compensation efficiency is high. Use for High temperature welding and curing;
11. The 8 temperature zones in the upper 8 are equipped with independent temperature sensing sensors to monitor and compensate the temperature balance of each temperature zone in real time;
12. Special supercharged air transport structure and special-shaped heating wire design, no noise, no vibration, has a very high heat exchange rate, the temperature difference Δt generated between the BGA bottom and the PCB board is extremely small, which is most consistent with the lead-free process. Requirements, especially for lead-free products with high welding requirements.
8800PC/LS 6600PC/LS Parameter:
model |
8800 |
6600 |
Number of heating zones |
UP 8 Down 8 |
UP 6 Down 6 |
Heating zone length |
2800mm |
2400mm |
heating method |
Full Hot air |
|
PCB maximum width |
400mm |
|
Transportation direction |
L to R |
|
Transport belt height |
Mesh belt 880±20mm |
|
Transmission method |
Mesh transport (Chain Rail Option) |
|
Transport belt speed |
0-2000mm/min |
|
power supply |
5-wire 3-phase AC 380V 50/60Hz |
|
Starting power |
30KW |
28KW |
Normal operating power |
7KW |
5KW |
Heating time |
Around 15 min |
|
Temperature control range |
Room temperature ~400℃ |
|
Temperature control method |
PID control + SSR drive |
|
Temperature control accuracy |
±1℃ |
|
Abnormal alarm |
Abnormal temperature alarm |
|
Dimensions (length * width * height) |
4200*850*1450 |
3500*850*1450 |
Machine weight |
900kg |
700kg |
8 zones reflow oven
835PC/LS 635PC/LS Product parameters:
Model |
835PC/LS |
635PC/LS |
Heating area number |
Up 8 zone, down 8 zone |
Up 6 zone, down 6 zone |
Heating zone length |
2800 mm |
2400 mm |
Heating mode |
full hot air small circulation |
full hot air small circulation |
Number of cooling zone |
Down 1 |
Down 1 |
PCB maximum width |
350 mm |
350 mm |
Transportation direction |
left to right (or right to left) |
left to right (or right to left) |
The height of conveyor belt |
900±20mm |
900±20mm |
Transmission Mode |
Mesh transmission |
Mesh transmission |
Conveyor belt speed |
0-1500mm/min |
0-1500mm/min |
power supply |
5 line 3 phase 380v 50/60 hz |
5 line 3 phase 380v 50/60 hz |
Start the power |
28kw |
16kw |
Normal work power |
7 kw |
5 kw |
Heating time |
about 15 minutes |
about 15 minutes |
Temperature control range |
at room temperature to 350 ℃ |
at room temperature to 350 ℃ |
Temperature control mode |
PID closed loop control + SSR driver (computer + PLC) |
PID closed loop control + SSR driver (computer + PLC) |
Temperature control precision |
±1℃ |
±1℃ |
PCB temperature deviation |
±2℃ |
±2℃ |
Abnormal alarm |
Ultra-high temperature Low temperature alarm |
Ultra-high temperature Low temperature alarm |
Appearance size (L*W*H) |
4000 * 750 * 1350mm |
3500 * 750 * 1350mm |
Machine weight |
450 kg |
350 kg |
6 Zones Reflow oven soldering machine
PCB chain rail
PCB Mesh Conveyor
Large 8 zones Reflow soldering oven guide chain rail with PC control
SMT line site show
Shenzhen Wanbo Hi-tech Co Ltd is specializing in manufacturing smt machine, pick and place machine, LED pick and place machine, LED smt machine, reflow oven, reflow soldering machine, smt reflow oven, 6/8 zones reflow oven, wave solder machine, dual wave soldering machine, selective wave soldering machine, solder printer, stencil printer, solder paste printer, smt printer, PCB cutting machine, pcb separator, solder paste, solder, solder bar, miscroscope, ultrasonic cleaner, ultrasonic welding machine, smt assembly line, LED chip packaging machines etc. We have R&D team based in Shenzhen. Our goal is to build perfect world.
1. Can you do OEM?
Yes. Also can be customized according to the customer's specific requirements.
2. If 110V is available?
Yes. 110V and 220V can be switched arbitrarily.
3. What kind of plug does your product equip with?
American or Australian or European or UK plug or other types of plug.