Welcome to TradeChina
quality inspection in yiwu of container/jinjiang jiaxing inspection service*product test/product inspection
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Service Introduction
FA/SA
Mainly includes:
Supplier legitimacy:
Supplier legitimacy:
Business license; house proprietary certificate; export license; bank basic account and collecting account and so on.
Production capacity:
Quality control:
Production capacity:
Factory area,Production equipment, staff and storage area, etc.
Quality control:
Quality control procedure documents and the quality department fulfillment degree.
PSI/DPI
Mainly includes:
Pre-Shipment Inspection refers to an inspection carried out when all the goods are produced and packed completely. By conducting a sampling check in accordance with the AQL standard, to have an overall assessment of the quality of the goods.
Quantity check, Workmanship check, Product performance (testings), Measurement and Client's special requirements.
Pre-Shipment Inspection refers to an inspection carried out when all the goods are produced and packed completely. By conducting a sampling check in accordance with the AQL standard, to have an overall assessment of the quality of the goods.
CLC/CLS
Mainly includes:
Check quantity of loaded products, container status (cleanliness, moisture, rust, holes, etc.).
And monitor the loading process to ensure no damaged products and outer cartons are loaded into the container.
Also to remind factory to reinforce products when container is not fully loaded.
Inspection process
1. Quantity check
Generally, quantity check will be performed in during-production inspection(DPI), Pre-shipment / final inspection(PSI/FRI), Full inspection and container loading check(CLC).
It includes cartons quantity check and products per inner package check. And for final inspection, the products must be 100% finished and at least 80% finished.
The actual numbers will be recorded in the report as below:
2. Workmanship
Workmanship is a very important section in the whole process of inspection. It will cause in FAIL if the number of defects were too much.
Generally, the inspection standard is according to AQL standard, the form of ANSI/ASQZ1.4 (MIL-STD-105E). For sample size and the defects acceptance, level II and 0 for Critical, 2.5 for major and 4.0 for minor will be adopted, if there is no special requirements from clients.
Generally, the inspection standard is according to AQL standard, the form of ANSI/ASQZ1.4 (MIL-STD-105E). For sample size and the defects acceptance, level II and 0 for Critical, 2.5 for major and 4.0 for minor will be adopted, if there is no special requirements from clients.
Please refer to the bellow chart in the report:
Defect pictures:
Surface Damage - Maj
Dirty Mark - Min
Poor assembly - Maj
3.ON-Site Test
Testing is the most important part of inspection.
The main purpose is to check the basic function of product, the safety, durability, and all other performances.
The test items varies according to the products kinds.
Below are some common testing items for your reference:
The main purpose is to check the basic function of product, the safety, durability, and all other performances.
The test items varies according to the products kinds.
Below are some common testing items for your reference:
Assembly Test
Output voltage Test
Hi-pot Test
Carton drop Test
Charge/Discharge Test
No-Load Speed Test
Noise Test
Barcode Test
Function Test
4. Package & Product Measurement
Generally, measurement check includes package size & weight check and product size & weight check.
The check quantity is 1pc per item with the tolerance of 10% for package and 5% for product, if the actual results were different from the spec or requirements.
The check quantity is 1pc per item with the tolerance of 10% for package and 5% for product, if the actual results were different from the spec or requirements.
Carton Size Check
Carton Weight Check
Product Size Check
Product Weight Check
ADD: Client's special requirements
If clients have their own requirements of the products, pls inform me.
Almost all requirements can be achieved, and pls refer to the bellow chart for more details.
Our Advantages
With 15YEARS experience in third party inspection area, and 80 Qulified QC team
WEPROVING inspection is your PROFESSIONAL AND TRUSTWORTHY partner IN CHINA!
Anything need please contact
Sales Manager: Bonnie Ji
TEL: 86 025-85952912
MOB: 86-15305152322
EMAIL: sales3@wp-inspection.com
SKYPE: 3425635925@qq.com
QQ: 3425635925
Website:
www.weprovinginspection.com
www.weproving.com
Alibaba website:
weproving.en.alibaba.com
Service Type: PSI/DPI/FA/CLC
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier