Applicable materials Leather, plastic, PU, PVC, paper, flannel, business cards, wood, insoles, bamboo shoots, etc.
Material requirements Bronzing materials need to meet: flat and smooth; Hot-pressed, branded materials must be: flat and malleable; Cross-cutting, punching, and diamond material must be: flat and less than 5 mm thick.
Material size The thickness of the material is less than 16cm. If it is larger than 16cm, it needs to be customized to be used! Length * width less than or equal to 18 * 18cm can be printed in the middle of the material; length * width greater than 18 * 18cm can not be printed in the middle of the material; Because the pillars of the machine block the material, the position of the mold can be changed to properly adjust the distance.
The main parameters Temperature control range: 0 to 400 degrees Celsius Optional heating area and corresponding power: 5*10cm: 460W, 8*10cm: 460W, 5*15cm: 600W Optional voltage: 220V or 110V Machine volume: about 23*23*46cm Machine weight: 10kg Machine pressure: less than or equal to 160kg Adjustable lifting height: 0-16cm
manual hot stamping machine for leather,leather hot stamping machine,manual hot foil stamping machine for leather,hot stamping machine leather,leather hot foil stamping machine,pvc card hot foil stamping machine,pvc hot stamping machine,wood hot stamping machine.
|