The range of COSUPER TPI inverters is designed to meet power requirements in locations not covered by the grid or where electricity is very expensive.
The main feature of TPI inverters is that they are capable of generating electricity from Batteries to create 3-phase power to operate the appliances.TPI inverters are designed with three-phase balance technology to allow three-phase inverters give single phase power. With the low-frequency technology, TPI has better operating performance and stability, especially on inductive loads. Three phase balance supports both single phase and three phases at the same time
3 phase inverter features
Auto switch 4 FUN: DC to AC, AC bypass, AC charger, and UPS
Dry contact: input no AC signal to other devices (Optional)
Remote Control RS-232/485 (Optional)
Pure sine wave output, input & output fully isolation
Built-in AC battery charger may be connected in parallel
Three-phase loads unbalance ≤20%, Three phases four wire connection
Excellent loads with 3*rated start power, strong stability
LED display working, Digital LCD display data info
Input polarity/UV/OV/OS/OL/OT/DP protections
Models | TPI20K | |
Input | AC Input | 380V±20% (customizable) |
DC Input | 96V/110V/220V/384V/480V(customizable) | |
Frequency | 50±Hz | |
Output | Capacity | 20KVA |
Output Voltage | Three phase 380VAC (±5%) | |
Frequency | 50Hz(Without utility AC) | |
Frequency Stability | ±0.5% ( without utility AC) | |
Transient response | From no load to full load in 1S | |
Waveform | True sine wave THD<3% (0-100% Linear load) | |
Overload Capacity | 120% | |
Power Factor | 0.8 lag | |
Peak Factor | 3:1(Peak value of the output current | |
waveform/effective value | ||
Efficiency | >88% | |
Inverter | 20KHz SPWM Mode | |
Bypass | Transfer time | Transform: utility to inverter 0S; the inverter |
to bypass ≤5ms | ||
Load | 120% Rated power(Max) | |
Charger Current | (N+1)*5A | |
Protection | Battery UV | 190VDC±2, Auto off.216V±2 |
auto start (Customizable) | ||
Overload | 120% over20S output AC bypass with auto | |
Fault | Fault or internal overheat, bypass work | |
and alarm with auto | ||
EMC | EN50091-2 Approved (Filter Optional) | |
Display | LED Display | Utility (Green), inverter (Red), |
Output (Green), Fault (Yellow), | ||
Working Environ | Working Temp | -30-50 ℃ |
Relative Humidity | 20-95% Non-freezing | |
Noise | < 50dB , 1m Front | |
Storage Environ | Temp Relative Humidity | -20℃-85℃ |
Atmosphere | 86Kpa-106Kpa | |
Other | Size (mm) | 600*600*1100 |
new design:
Shipping way: By express, air, sea according to customer's requirements.
1) Technology support: We have a professional engineer teams and R&D dept.
2) After sales: in the warranty period, all service parts are free and shipment free
Q 1. How's the delivery time?
A. usually it will take about 15 days for production
Q 2. Tell me the standard of the package?
A. For the small capacity, it uses carton, but for big capacity, we should use strong wooden case for protection.
Q 3. What kind of material of the transformer?
A. 100% copper
Q 4.Would you accept to use our logo?
A. If you have good quantity, it absolutely no problem to do OEM.
Q 5. We want to know month capacity.
A. It depends on which model. For example for relay type small capacity, month capacity can reach near 20000pcs and big capacity near 3000pcs.
Q 6. Does the inverter connect with the solar system?
A.Yes.Because of the unique feature which combines invert, charger and AC auto-transfer switch into one complete system, made inverter not only connect with the solar system, also could be used in& officer equipment, household items, power tools and etc..
Q7. what kind of certificate you have?
A. Our company already achieve CE FCC PSE RHOS.