products diesel fuel turbine flowmeter flow meter oil

304 stainless steel tube measuring tube

Dual-phase steel pipe measuring impeller

It Can measure water, oil, alcohol and other non-corrosive clean liquid on stainless steel.

The turbine flowmeter's advantages are as the following:

(1):High accuracy,the most accurate flow meter in all flow meter.

(2): Good repeatability.

(3):Zero-point drift,good anti-interference ability.

(4):Compact structure.

(5):Wide range.

Sensor selection:

In general,the sensor caliber should be determined based on the normal flow range,according to the operating conditions.

If the diameter of the pipe is inconsistent with the diameter of the sensor, consider expanding or constricting to meet the flow range.

There are three kinds of connection ways:Thread, clamp, flange.

Installation Notes:

1.Flow sensor can be installed  horizontally or vertically,The direction of the fluid must be up when installing vertically, the liquid should be filled with pipes, and there must be no bubbles

2.The flow direction of the liquid during installation coincides with the direction of the arrow on the sensor housing. The upstream of the sensor is a straight pipe section with a length of 20 times and a straight pipe section with a diameter of not less than 5 times in the downstream.

3.Sensors should be kept away from strong external electromagnetic fields and cannot be avoided. Shielding measures should be taken.

4.It is recommended to install a bypass pipe at the installation site of the sensor for maintenance without affecting the normal delivery of the liquid.

It is widely used in pharmaceutical, food, beverage and other industries, as measured ingredients, control, finished filling and other uses of flow measurement instruments.