price of silicone rubber per kg clear rtv liquid silicone rubber for Epoxy resin, large cement components/crafts/alloy molding
Features and Usage
1.This product is the Addition Liquid Silicone Rubber with two-component condensed.
2.It is of sound flowability, tensile strength, tear resistance, shrink rate.
3.It doesn't have the product thickness limitation and it can be deeply cured.
4.It is of high transparency and can endure heat to 300°C-500°C. It can be used to mold epoxy resin, polyester resin, polystyrene, paraffin, large cement components, and precision mould such as metal crafts, alloy, and food mould, etc.
1. Mixture: Mix up the rubber and the curing agent of 10:1 and mix the A and B component in the proportion of 1 : 1, it can be manually stirred or mixed by equipment.
2. Defoaming: The mixed rubber should be deaerated in vacuum before cast pouring.
3. Molding: Pour the rubber material after defoaming into the mould to fully cure for 2-3 hours at room temperature (28°C) ; it can be cured within ten minutes with heating at the temperature of 60°C -120°C.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time ,so must pass through the vacuum exhaust bubble treatment.
7.How to improve the service life of the silicone mold?
The way as follwing:
First,we make the mold should be choose a suitable hardness silicone based on product's size.
Second,silicone oil can not be added in silicone because it can make the mold become soft. As well as decrease tensile and tear strength.
Package, Storage and Attention:
1. This kind of rubber is packed in 25KG/iron drum and curing agent in 1L /plastic bottle.
2.This product should be sealed and placed in cool place so as to prevent rain and sunlight exposure.
3.The storage period of this product is half a year. If it occurs to be more viscous, stir it and reuse it with the same property. It can be reused after reinspection when it exceed the storage period.
4.The surface of the replicative mold product such as glass, ceramics, resin, wooden ware or some product with coating should be smearred with surfactants (such as detergent, shampoo, soapsuds) . Perfuse or brush the silicone rubber after the water evaporates, which facilitates demoulding.
5.This product is non-dangerous .During the operation, try to prevent any possibility of eyes and skin contact with the curing agent. Wash affected skin thoroughly with soap and water in case of touching it. Flush with clean running water immediately at least for 15 minutes, and consult a doctor if necessary.
For the further information, please feel free to contact Chloe Zhou: