1. 100% high purity polypropylene (melt blown), no adhesives
2. High dirt holding capacity and low pressure loss
3. Many connections(DOE, 226, 222 End caps)are available
4. Wide chemical compatibility, various micron ratings(1um to 100um)
5. One piece construction, up to 1524mm(60”)
APPLICATION
1. Pre-filtration in process water treatment industry
2. Clarification for waste water treatment
3. Bottled water, wine, beer pre-filtration in food and beverage industry
4. Pre-filtration before RO system in electronics process water
5. Organic solvents, inks, plating solution, metal cutting, fluids, photoresist filtration
Working Principle of the PP Melt filter
Sediment filter is made of fine melted polypropylene, which is blown and spun in a cylinder-like form. The main function of sediment filter is to remove large and fine particles from the drinking water, such as sand, dirt, silt, slugger,sediments and rust particles. These filters have graded density layers, meaning the outer layers are more porous, catching larger particles, while the inner layers are a finer micron. Catching smaller particles.
Construction Materials
|
Filter Media |
Melt Blown Polypropylene |
Inner core |
PP or core less |
|
Seal Method |
Thermal Bonding, No Adhesives |
|
O-rings/ Gaskets(only for 222,226,DOE) |
Silicone/Nitrile/EPDM/Viton/Teflon |
|
Technical Data
|
Micron Rating |
1.0, 5.0, 10, 20, 50, 70, 100um |
Normal Operating Temperature |
<50℃ (122 oF) |
|
Max. Operating Temperature |
<80℃ (176 oF) |
|
Normal flow direction pressure |
4.0 bar(58 psi) |
|
Reverse flow direction pressure |
2.0 bar(29pci) |
|
Filtration efficiency |
≥ 80% |
|
Sterilization |
Not recommended |
|
Cartridge Size
|
Outer Diameter |
Φ 63(2.5'')/114(4.5) mm |
Inner Diameter |
Φ 28mm (1.10") |
|
Filtration area(m2) |
0.4 /10'' |
|
Length(based on DOE end cap) |
10’’, 20’’, 30’’, 40’’, 50'', 60'' |
|
pH |
1-13 |
1.Q: Are you trading company or manufacturer ?
A: We are factory.
2.Q: How long is your delivery time?
A: Generally it is 3-10 days if the goods are in stock. or it is 7-20 days if the goods are not in stock, it is according to quantity.
3.Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
4.Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.