1.Built-in battery charger
2.Built-out fuse
3.Automatically transfer switch(Mains line-to-Battery)
4.Three-stage charging
portable usp backup power inverter 12v 220v 300w inverter with battery charger
Inverter/Charger can provide your equipment with utility-supplied AC power when it is available, and during blackouts and brownouts, the unit will automatically switches over to an external battery source to power connected equipment with voltage and frequency-controlled AC power.
Specification:
Model |
KSC300P |
|
Output Waveform |
Pure Sine Wave |
|
Inverter Spec. |
Continuous Power |
300W |
Maximum Constant Power Start |
360W |
|
Peak Power |
600W |
|
Input Voltage |
12V/24V/48V |
|
Output Voltage |
100V/110V/115V/120V/220V/230V/240V |
|
No Load Current Draws |
<0.8A |
|
Dimensions(L*W*H) |
230*150*50mm |
|
Weight |
3.5KGS |
|
Protection Function |
Low voltage alarm Low voltage shut down Over input voltage Over temperature Over load Short circuit Reverse Polarity (Fuse) |
|
Charger Spec. |
AC Input voltage |
AC80V-130V±10% AC180V-260V±10% |
DC Charging Voltage |
12V/24V/48V |
|
DC Charging Current |
10A/20A/30A |
|
Three-stage Charging |
Bulk/Absorption/Float charge |
|
Automatically Switching Time |
≤20ms |
|
LED Indicator Light |
Charger, Fault, Inverter |
|
Application |
Automobiles, RVs, Boats, tractors, trucks, Laptops, TV sets, Video Games, CD Players, DVD Players, Power tool, Office Equipment, Major Household Appliances, etc. |
|
Environment |
Operating temperature: -10°C~+50°C Operating relative humidity: 20%~90%RH non-condensing Storage temperature: -30°C~+70°C Cooling Fan automatically run: inner temperature rising up is ≥45°C |
|
Packing |
Inner packing |
320*200*140mm |
Outer packing |
420*340*430mm |
|
Gross weight |
12KGS/5PCS |
Inverter chargers are used in the same way as inverter but have an added advantage in that it can be connected to your AC supplier like the grid system or a generator. This connection is used for charging the batteries from this AC supply in power backup systems or when battery charging is not available from your other systems.
Three-stage charging:
Stage |
Description |
Stage 1:Bulk Charge-Constant current |
Current is supplied to the battery at a constant rate while voltage gradually rises. |
Stage2:Absorption Charge-Constant Voltage |
Voltage remains constant and current reduces as the battery becomes charged. This ensures complete charging. |
Stage3:Float Charge
|
After the battery reach full charge, charging voltage is reduced to a lower level to prevent gassing and to prolong life. This stage is often referred to as a maintenance charge. Rather than charging a battery, it keeps an already-charged battery from discharging while providing load current. |
Note: *The specifications are subject to change without prior notice for further improvement of products.