Pneumatic air booster pumps/system

Suncenter  DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 100mm, as a single action pump, all single acting pump head with exhaust cooling.

* technical parameters

Driven source: clean compressed air

Air pressure control system

Drive compressed air pressure: 1-8bar (recommended drive pressure <8bar)

Boost Ratio:2:1

Maximum flow rate : 580L/min

Maximum air output pressure: 16bar.

Applicable medium: clean air

Air inlet minimum pressure: 1bar

Suncenter  DGVA05 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

* technical parameters

Driven source: clean compressed air

Air pressure control system

Drive compressed air pressure: 2-8bar (recommended drive pressure <8bar)

Boost Ratio:5:1

Maximum flow rate : 820L/min

Maximum air output pressure: 40bar.

Applicable medium: clean air

Air inlet minimum pressure: 2bar

Characteristics :
It is using pure compressed air as the driving source, pneumatic booster pump for the pressure source, the use of pure air as the pressurized medium, the output air pressure and the pressure of the driving air source pressure. By adjusting the pressure of the driven air source, the corresponding pressure of the air pressure can be obtained. When the air pressure of the air pressure and the pressure of the booster is balanced, the pneumatic booster pump stops the pressurization, and the output air pressure is stable. Therefore it has the characteristics of explosion proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.

DGS-DGMA02 air pressure booster system

The system including: DGMA02 air booster pump,

F.R.L combination (adjust driven air pressure+ filter+ lubricant)

Air tank (20L/40L),Driven air switch, high pressure needle valve,

high pressure gauge, reducing valve

DGS-DGVA05 air pressure booster system
The system including: DGVA05 air booster pump,
F.R.L combination (adjust driven air pressure+ filter+ lubricant)
Air tank (20L/40L),Driven air switch, high pressure needle valve,
high pressure gauge, reducing valve

Compressed Air Driven Gas Booster Pump- DGA Series

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include:

l  Compressed Air driven - no electricity required (connect to normal air compressor)

l  In order to extend the lifetime of the pump, the driving air pressure should

   not be higher than 8 bar

l  No airline lubricator required

l  Hydrocarbon free - separation between air and gas sections

l  Pressures to 80Mpa (11,600 psi) 

l  Wide range of models with different ratios

l  Built-in-cooling on most models

l  Easy to install, operate and maintain

l  Best price / performance ratio

l  No heat, flame or spark risk and explosion proof

Applications for Air Driven Gas Boosters

SUNCENTER Air Driven Gas Boosters provide for pressures up to 80Mpa. Used for oil free compression not only of air or Nitrogen, but also flammable and risk gases like hydrogen, oxygen and natural gas. These boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.

Air driven boosters are an efficient alternative instead of electrically driven products and can be used in explosion- proof areas.

As a result of the wide range of models it is possible to select the optimum booster for each application. Single stage, double acting or two stage boosters or a combination of these models can be used to achieve different operating pressures and flow capacities.

SUNCENTER Air Driven Gas Boosters are ideal and widely used for hydrostatic and burst testing for valves, pipes, tubing and pressure vessels; Calibration for safety valves; Automobile regulator detecting and telecommunication cable inflatable appliances.

Applications

l  Pressure test with gas

l  Gas transfer and filling(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)

l  Charging of gas cylinder and accumulator with nitrogen

l  Supply for isolating gas systems

l  Gas assisted injection molding

l  Transfer of oxygen cylinders

l  Charging of breathing air bottles

l  Leak test

l  Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and        tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft components

l  Safety valve adjusting 

DGA series gas booster pumps(Single acting, single air drive head):

l  DGA pumps are available with high quality seals, which provide significantly better service life 

l  Pump head fitted with exhaust cooling devices.

l  All parts in contact with the gas are made of aluminum or stainless steel. 

Compressed Air Driven Gas Booster Pump- DGT Series

DGT series gas booster pumps(Double acting, double stage, single air drive head ):

DGT pumps are double acting, double stage with single air drive head pumps. They can provide for super high pressure with very low inlet pressure.

l  DGT pumps are available with high quality seals, which provide significantly better service life as well.

l  Double pump heads with exhaust cooling devices.

l  Allparts in contact with the gas are made of aluminum or stainless steel.

Suncenter Fluid Control Equipment Co., Ltd is the memeber company of Suncenter Group,which is located in Dongguan city of Guangdong province in China.With more than 15 years experiences in fluid pressure exchange and controlling field, we provide various kinds of pneumatic and hydraulic booster pumps, systems and solutions to the customers all over the world. Due to our best product quality,competitive price as well as excellent after-sales service, we have win a great reputation in the field.

Our main products including:
Pneumatic Booster Pumps (Air Driven Gas Booster Pump,Air Driven Liquid Pump,Air Amplifiers)

Pneumatic Booster Systems (Air Driven Gas/Liquid Booster Stations, HFC-227ea/FM200 filling machine,

High Pressure Hydraulic/Pneumatic Test Machine,Burst/Hydrostatic pressure testing machine,

Impulse Testing Machine,etc.)

If you are interested in any of our products, please feel free to contact us, we could also make the customized products according to your special requirements.

How to Select Suncenter Air Driven Gas Boosters/Systems?

In order to choose suitable booster pump or systems for you,

please kindly reply us the following questions:

1.What is your present gas pressure?(    )bar

2.What is your gas?oxygen gas,nitrogen gas or other gases?

3.What outlet gas pressure do you want?(    )bar

4.What driven air pressure (of your air compressor) can you offer?(    )bar,

because our booster is completely air operated and no need any electricity

5.What outlet gas flow rate do you need?(    )L/min

How to Select Suncenter Air Driven Liquid Boosters/Systems?

In order to choose suitable liquid booster pump or systems for you,

please kindly reply us the following questions:

1.What is the liquid you want to booster?

2.What outlet liquid pressure do you want?(    )bar

3.What driven air pressure (of your air compressor) can you offer?(    )bar,

because our booster is completely air operated and no need any electricity

4.what outlet liquid flow rate do you need?(    )L/min