portable machine used to splice rubber conveyor belt

                            portable machine used to splice rubber conveyor belt

 Usage of Vulcanizer

Model DSLJ Electrothermic Rubber Belt Vulcanizer (following is called "vulcanizer'' for short), has the specialities of small volume, light weight, general three-phase power supply, homogeneous temperature of electrothemic plae. Well-distributed pressure {0-1.8Mpa) supplied by a hydiaulic system, equipping of light automatic control panel, connection of the control panel and the main equipment done by the integrated plug with the multicore cable, easy maintenance, realible working etc.

It is now used widely for the on-site vulcanizing connection of canvas~ nylon, conveyer with steel cable core inside as well as for the connection of rubber belt with special characteristics of anticorrosion and heat resistant under the circumstance of no explosive gas or any harmful gas to corrode the metal~ which is accepted by the metallurgical engineering, mineral production, power station~ harbor machinery architectural working or chemical industry etc.

The quality of the belt connection will influence the working efficiency of the rubber belt or the length of life directly~ especially for the long distance and high-strength conveyer. Therefore, model DSLJ vulcanizer is the necessary accessories for the rubber belt conveyer equipment.

Technical parameters

 We can design and manufacture all kinds of non-standarded machinery according to the costomers' requirement.

Technical Data

1. Pressure of vul: 1.5MPa

2. Temp. of  vul: 145℃

3. Supface temp. diff. of vul.Plate: ±3℃

4.Hyperthermic time: >50min (mormal temp. is up to 145℃)

5.Voltage: 380V,50Hz

6.Output power of control panel: 36KW

7.Temp.~adjusting scope:0~200℃

8. Time.~adjusting scope: 0~59 min

9.After pressuring the up and down beating    Plates in 0.8 MPa, the gap between the

Piate is no more than  0.5

Application:

Our products are mainly applied to industries for splicing and repairing for conveyor belts such as metallurgy, mine, power plant, port, dock, construction material cement, chemical industry , tobacco ,and food automatic line field

Brief Introduction of Main Structure

The vulcanizer is constituted by the following parts.

    l. machine frame. 2.clamps. 3.back-up iron plates. 4.bolt. 5.nuts. 6.washes. 9.heat-proof plates. 10.up heating plates.14.down heating plates.

15.hydraulic plates (the above parts are the constitution of main equipment). 7.high-pressure soft pipe. 8.pressure-testing pump. 11. secondary cables. 12.controi panel. 13.prima-y cable. (please find  the following  drawing in detail)

Technical Parameters:

1.Machine Maximum size: from 650MM-4200MM;

2.Voltage: 380V 660V 480V 440V 415V 400V or 220V;

3.Fast Cooling time: 5 minutes (from 145 degrees down to 70 degrees or less);

4. Time for temperature raise (from normal temperature to vulcanizing temperature) no more than 50 minutes;

5.Vulcanizing pressure:1.8MPa (details refer to users’ specifications and factory markings);

6.Time of heat preservation for vulcanizing could be adjusted according to thickness of the rubber belts;

7. Splicing length of rubber conveyor belt for vulcanizing jointing could be connected together by single or several pieces if necessary;

8. Make clear for model and specification of product and indicate width and tensile strength of rubber conveyor belt as well as tension in kilogram required for vulcanizing jointing when ordering products.

 Specification:

       Machines pictures show: