polyurethane foam insulation for pipes for chilled water and heating supply
Production Capacity of foam insulation for pipes
1.owns 7lines of polyurethane insulation pipe production line
2.can produce 3000km of polyurethane pre-fabricated direct buried insulation pipe from DN30-DN1600mm annually
3.DN30-DN1600mm,all kinds of diameters and insulation thickness of the pipe and the corresponding pipe fittings are available (elbow,tee,reducer,fixed bracket and so on)
Structure of foam insulation for pipes
Specification of foam insulation for pipes
DN | Steel Pipe (mm) | HDPE pipe (mm) | Thickness of Insulation Layer (mm) | ||
Diameter | Thickness | Diameter | Thickness | ||
25 | 32 | 3 | 90 | 2.5 | 26.5 |
40 | 45 | 3.5 | 110 | 2.5 | 30 |
50 | 57 | 3.5 | 120 | 3 | 28.5 |
70 | 76 | 4 | 140 | 3 | 29 |
80 | 89 | 4 | 150 | 3 | 27.5 |
100 | 108 | 4.5 | 180 | 3 | 33 |
125 | 133 | 4.5 | 225 | 3.5 | 42.5 |
150 | 159 | 5 | 250 | 3.9 | 41.6 |
200 | 219 | 6 | 315 | 4.9 | 43.1 |
250 | 273 | 6 | 365 | 5.6 | 40.4 |
300 | 325 | 7 | 420 | 7 | 40.5 |
350 | 377 | 7 | 500 | 7.8 | 53.7 |
400 | 426 | 7 | 560 | 8.8 | 58.2 |
450 | 478 | 8 | 600 | 8.8 | 52.2 |
500 | 529 | 8 | 655 | 9.8 | 53.2 |
600 | 630 | 8 | 760 | 11.5 | 53.5 |
700 | 720 | 8 | 850 | 12 | 53 |
800 | 820 | 10 | 960 | 14 | 56 |
900 | 920 | 10 | 1055 | 14 | 53.5 |
1000 | 1020 | 10 | 1155 | 14 | 53.5 |
1100 | 1120 | 12 | 1256 | 14 | 54 |
1200 | 1220 | 12 | 1370 | 16 | 59 |
1200 | 1220 | 14 | 1370 | 16 | 59 |
1400 | 1420 | 14 | 1580 | 16 | 64 |
1400 | 1420 | 16 | 1600 | 18 | 72 |
foam insulation for pipes
production process of foam insulation for pipes
Advantage of foam insulation for pipes
1.Good insulation properties ,low heat loss (only 25% of the traditional pipe)
2.Energy saving and energy costs reducing
3.Strong waterproof and corrosion resistance and high mechanical strength
4.Above 30-50 years move the service life
5.No trench,be directly buried in ground or water
6.Alarm system can be set to automatically detect pipeline leakage failure, automatic alarm, security and stability
7.Products buried in the ground, is conducive to landscaping and urban planning.
foam insulation for pipes
Application of foam insulation for pipes
in the field of centralized heating,cooling water supply,
oil and gas,and industries
foam insulation for pipes
1: Are you a manufacturer or a trading company?
We are a manufacturer which has more than 2 0 years' history.
2: Where is your manufacturer? How to visit it?
Our factory located in Yutian Economic Development Zone ,TangShan , China. A bout 1.5 hours drive time to Beijing and TianJin airport . Mainly producing pre-insulated pipes, HDPE outer protection pipe and 3PE anti-corrosive pipe.
You can take a plane to Beijing or Tianjin .then we could pick up you at the airport .
3: How do we control our products' quality?
We have professional quality control workers and quality inspection center(CNAS lab) to control the entire production quality.
4: How do you transport these products?
We use straps to hoist pre-insulated pipes, it can avoid no damage to our products, no hooks for lifting pipe directly. During the handling process, collision, tossing and more ground drag scrolling are strictly forbidden.
In the process of long distance transport, the pipes should be fixed, and not damage outer protecting pipes and insulating layers.
5: Can I customize some other sizes of products?
Yes! We can according to the customer's request.
If you have any other questions, please don't hesitate, contact us.
Let us begin to communicate immediately >>>
1