polyethylene pipeline wrapping tape
Coverage:
Polyethylene pipeline wrapping tape coating systems for anticorrosion of field joints, fittings, and specifically piping, gas/oil/water pipelines, The Adhesive is a key in ground/overhead performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
Polyethylene pipeline wrapping tape is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. The film of protective tape is thicker and higher in intensity, color is white.
Advantages
Polyethylene pipeline wrapping tape will protect the pipe and its anti-corrosion tape surface from damages. Xunda adhesive tapes have been specially developed for high-quality, onsite corrosion protection for joints, in cases where the pipeline has already been installed. The material is easy, safe and quick to apply on welded joints, bends and other complicated shapes.
The systems fulfill the requirements of DIN 30672 and EN 12068, and they are also DVGW-approved.
Technical Parameters | |
Tape thickness | 0.508mm,0.635mm,0.75mm or others |
Width | 50mm,100mm,150mm,225mm or others |
Length | 30m,60m,120m,180m or others |
Color | Black , Yellow ,White or others |
Peel Adhesion to Primed Steel | 30N/cm |
Peel Adhesion to Itself | 5N/cm |
0.2g/m224h | |
Water Absorptivity | 0.1% max |
Dielectric Strength | 30Kv |
Impact Resistance | 5.5Nm |
penetration resistance | <15% |
Temperature Range For Application/ For Service | 5℃ -50℃/-30℃ - 85℃ |