pleated water filter element 0.03 um PES filter cartridge for solar water
♦ Part one: Frotec Filter Cartridge Description
1.Brief introduction and Technical Specification
PES Pleated Filter Cartridge is constructed of excellent PES(polyethersulfone) media and pp(polypropylene) materials to meet high standard performace. With unique hydrophilic characteristics and absolutely rate, this filter shows good flow rates. The compatibility with a broad range of chemicals provides long service life. 100% integrity tested by bubble point and diffusional flow to ensure consistent and reliable performance. No adhesive, thermal bonded manufacturing enable the smallest contaminant extraction and high durability.
Material of Construction
• Media: Hydrophilic pes membrane
• Support layer: Polypropylene
• Core / Cage / End adaptor: Polypropylene
• Sealing Method: Thermal bonding No Adhesives
• Seal Material:Silicone,EDPM,Buna,Viton, Teflon,E-FKM
• Micron Rating: 0.1µm, 0.22µm, 0.45µm
• Filtration Area: 0.64m2 each 10" length
Dimensions
• Outside diameter: 2.7” (69mm)
• Length: 5", 10", 20", 30", 40"
Recommended Operating Conditions
Max. Differential Pressure:
Forward - 4.2bar@ 25°C
Reverse - 2.1bar@ 25°C
Max. Operating Temperature: 80°C
Sterilization: 20times, 30 Minutes cycles at 121°C
Integrity Test
Pore Size |
Minimum Water Bubble Point |
Diffusional Flow cc/min @ Test Pressure per 10” length |
0.1 μm |
– |
≤15 @ 3.3 bar |
0.2 μm |
≥3.1 bar |
≤15 @ 2.4 bar |
0.45 μm |
≥1.8bar |
≤15 @1.4 bar |
Ordering
Model PES |
Micron Rating |
End Adaptor |
Seal |
Length |
PES
|
010: 0.1μm 020: 0.2μm 045: 0.45μm
|
Code 0 - DOE Double open end 1 - 226/Fin 2 - 222/Fin 3 - 222/Flat closed 4 - 226/Flat closed 5 - 215/Flat closed 6 - O-ring insert/Flat closed |
E-EPDM N-Buna S-Silicone V-Viton T-Teflon E-FKM |
5" 10" 20" 30" 40" |
2. Product Show
3. Application
• Micro-filtration in ultrapure water systems.
• Beverage ,wine, draft beer and other drinks
• Plating solutions
• Pharmaceutics
• Chemical industry
♦ Part two: Frotec Filter Cartridge Packaging
♦ Part three: Frotec Serivce
1. Our Service
♦Welcome to your inquiry,you are promised to get our quotation withing 24 hours
♦We are pleased to send you a sample on you confirm
♦We promise that we will implement your order on time
♦You are promised to get the best quality at the best price with the best service
2.FAQ
a.OEM service available for filter cartridge?
Yes, OEM service is available, but the Frotec brand price better than OEM
b.Payment Term
We can accept L/C, T/T, Western Union, MoneyGram and paypal
c.Certicification
We had passed ISO9001
d.Shipping
If your order is not big enough , Door to Door Service is the best choice via UPS,FEDEX,DHL,EMS.
For big quantity, by air or by sea through your forwarder is one Normal Way , we also can provide cost-effective forwarder for your reference.
e. Lead time
The normal lead time is 7-15 days, which depends on your quantity.
♦ Part four: Frotec Advantage Products
|
|
|
|
|
|