Measurement | Item | |||
Injection Unit Data | ZX 260- PET | |||
Screw diameter | mm | 65 | 75 | |
Screw L/D ratio | - | 25 | 25 | |
Screw stroke | mm | 300 | ||
Theoretical shot volume | cm3 | 995 | 1325 | |
Shot weight PET | g | 1190 | 1722 | |
Injection pressure | Mpa | 139 | 104 | |
Max. screw speed | rpm | 134 | 100 | |
Injection piston speed | g/s | 440 | 580 | |
Clamping Unit | ||||
Clamping force | KN | 2600 | ||
Tie-bar distance (HxV) | mm | 575*575 | ||
Opening Stroke max | mm | 550 | ||
Mold height min | mm | 220 | ||
Mold height max | mm | 580 | ||
Ejector stoke | mm | 170 | ||
Ejector force | KN | 90 | ||
Number of ejector bar | KN | 9 | ||
Other | ||||
Sys. Pressure | Mpa | 17.5 | ||
Pump motor | KW | 30 | ||
Electric heating power | KW | 22.5 | 30 | |
Machine dimensions | m | 6.4* 1.4 *2.2 | ||
Machine weight | Ton | 8 |