PIC EMBEDDED TRAINER KIT (E87-05)
E87-05 is a single board Microcontroller Trainer Kit based on 16 bit PIC18F Microcontroller, which is widely used to train engineers to develop on software/hardware for any industrial process & control. Kit has onboard Interfaces like LCD, Seven Segment Display, Keybaord Matrix, Photo detector, RTC,ADC, DAC, Heater control, Temperature Sensor, DC Motor, Relay, Buzzer, Opto Input, Opto Output, Clock Generator, General Purpose Breadboard for Man to Machine Interface. Specifications
Microntroller
- CPU: Microchip 18F4550 operating on crystal frequency @ 20MHz.
- On-chip 32KB Flash memory and 2048 byte SRAM.
- On-chip 256byte EEPROM.
- On-chip UART, SPI, I2C, PWM.
- On-chip 8 Channel 10 bit ADC.
- On-chip USB Interface.
- 40 Pin ZIF socket for Microcontroller.
- All I/O Lines should be provided in 4 separate 16 pin female connector for Bread board connectivity through single stand wires.
- On board Reset key
- On board 10 pin connector for ISP Programming facility with separate USB based ISP Programmer module for burning the controller.
- Mini Signal Generator
- Fixed TTL clock of frequencies 10 Hz, 100 Hz, 1KHz & 10 Khz.
Onboard Applications
- 8 LED's to display Digital Output.
- 8 Switches to give Digital Input indicated by LED's.
- 2 Bicolor LEDs to display.
- 16x2 Alphanumeric LCD backlit display.
- 4x4 Matrix Keyboard.
- 600 Tie Points Bread Board Area provided
- Piezoelectric Buzzer.
- SPI Digital Potentiometer using MCP41010.
- 4 nos. of 12V SPDT Relay.
- 4 digit seven segment displays.
- 8 Opto inputs & 8 Opto Outputs using Pc817.
- DC Motor interface with Photo detector assembly for speed measurement.
- I2C compatible Device:
- 24C512 EEPROM (64KB)
- DS1307 RTC with suitable battery
- 4Ch. 8bit ADC & 1Ch. 8 bit DAC using PCF8591.
- Temperature sensor interface using Lm35.
- Resistive Heater for Temperature control.
- Temperature sensor interface using DS18B20.
- RS232 Serial Interface provided through 9 Pin D-Type Connector
- 24 I/O Lines Provided on a 26 pin FRC Connector for external interface.
- On board supply + 12V/1A, 5V/2A is Provided.
- Supply Input Voltage: 230V AC.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB is used.
- Attractive Metallic enclosures.
- 9 Pin Serial Cable & USB Cable Provided
- Software in windows XP/2000
- User's Manual with sample experiments