Electrical Input data
Specification item | Value | Unit | |
Rated input voltage range | 202...254 | Vac | |
Rated input voltage | 230 | Vac | |
Rated input frequency range | 47...63 | Hz | |
Rated input current | 0.48 | A | |
Max. input current | 0.56 | A | |
Rated input power | 112 | W | |
Power factor | 0.95 | ||
Total harmonic distortion | 10 | % | |
Efficiency | ≥ 90 | % | |
Input voltage AC range | 85...305 | Vac | |
Input frequency AC range | 45...66 | Hz | |
Isolation input to output | Basic |
Electrical Output data
Specification item | Value | Unit | Condition |
Regulation method | Constant Current | ||
Output voltage | 46...143 | Vdc | |
Output voltage max. | 220 | V | Peak voltage at open load |
Output current | 0.3...1.05 | A | Full output current setting |
Output current min programmable | 300 | mA | |
Output current min dimming | 70 | mA | |
Output current tolerance | ± 5 | % | |
Output current ripple LF | ≤ 4 | % | Ripple = peak / average@ ≤3KHz |
Output current ripple HF | ≤ 15 | % | |
Output power | 33...100 | W |
Electrical Data Control Input
Specification item | Value | Unit | Condition |
Control method | Default: 1-10V. Optional: reversed 1-10V, reversed 0-5V | ||
Dimming range | 10...100 | % | Default range |
Isolation controls input to output | Basic |
Operational Temperature and Humidity
Specification item | Value | Unit | Condition |
Ambient temperature | -40...+55 | ºC | Higher ambient temperature allowed as long as Tcase-max is not |
exceeded | 75 | ºC | |
Tcase-max | 80 | ºC | Maximum temperature measured at Tcase-point |
Tcase-life | 70 | ºC | Measured at Tcase-point |
Maximum housing temperature | 110 | ºC | In case of a failure |
Lifetime
Specification item | Value | Unit | Condition |
Driver lifetime | 50,000 | hours | Measured temperature at Tcase-point is Tcase-max. Maximum |
Programmable Features
Specification item | Value | Remark | Condition |
Set Adjustable Output Current (AOC) | See Design-in guide. | Default output current: = 700 mA | |
Constant Lumen Over Lifetime (CLO) | Yes | ||
Diagnostics | Yes | ||
Dynadimmer | Yes |
Features
Specification item | Value | Remark | Condition |
Open load protection | Yes | Automatic recovering | |
Short circuit protection | Yes | Automatic recovering | |
Over power protection | Yes | Automatic recovering | |
Hot wiring | No | ||
Suitable for fixtures with protection class | I | per IEC60598 | |
Over temperature protection driver | Yes | Automatic recovering | |
Overheating protection | Yes | Automatic recovering |
Surge Capability
Specification item | Value | Unit | Condition |
Mains surge immunity (diff. mode) | 6 | kV | Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us |
Mains surge immunity (comm. mode) | 10 | kV | Acc. IEC61000-4-5. 12 Ohm 1.2/50us,8/20us |
Dimensions
Specification item | Value | Unit | Condition |
Length (A1) | 175 | mm | |
Width (B1) | 68.2 | mm | |
Height (C1) | 45 | mm | |
Fixing hole diameter (D1) | 4 | mm | |
Fixing hole distance (A2) | 162 | mm | |
Weight | 780 | gram |
Q1. Are you Philips Authorized agents?
A:Yes, we can offer Philips Authorized Certificate.
Q2: What’s your main products?
Led Drivers and modules. Road Light, Street Light and Highbay Lights.
We still can offer one step lighting Solution, depending on good cooperation relation with China(mainland) Lighting Manufacturers.
Q3. How about the delivery time ?
LED driver and modules Sample: 5-7days
LED driver and mudules Bulk Order: need recheck with us, usually 30-40 days.
LED Lights(sample& Bulk Order): need recheck with us, usually 30-40 days.
Q4. What is the Transaction terms ?
A: Samples: Cash before shipping.
B: Bulk Order: 50% in advance(deposit), 50% of the balance should be paid before shipping.
Q5. How is the Logistics and Transportation time ?
A Samples: International Express Service- DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive.
B.Bulk order : Airline and Sea shipping are available. Transportation time: need recheck with logistic company.
Q6. Do you have a minimum order?
Bulk order: Philips Original MOQ Packing(usually, 10pcs -12pcs in one carton).
Q7: How Long is the Quality assurance Time?
Philips Official Quality Assurance Time(Usually, 3-5years depend on products.)